Janome Horizon Memory Craft 15000 Manual

The Janome Horizon Memory Craft 15000 is a premium computerized sewing and embroidery machine featuring a large 11-inch sewing space, AcuFeed Flex™ fabric feeding system, built-in stitches and embroidery designs, advanced needle threader, automatic thread cutter, knee lifter, and extensive memory capabilities. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Sewing and Embroidery Functions 8. Memory and Storage 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Large LCD touch screen, AcuFeed Flex™ system, built-in needle threader, automatic thread cutter, knee lifter, USB port, embroidery unit, and extensive stitch memory.

Feature	Description
LCD Touch Screen	11-inch color display for easy navigation
AcuFeed Flex™ System	Even fabric feeding for precise stitching
Built-in Needle Threader	Automatic needle threading with push-button
Automatic Thread Cutter	Cuts top and bobbin threads automatically
Knee Lifter	Hands-free presser foot lifting
USB Port	For importing designs and updates
Embroidery Unit	Built-in embroidery capabilities
Stitch Memory	Extensive memory for saving custom settings
Speed Control	Adjustable sewing speed up to 1,000 SPM
Built-in Stitches	Over 400 built-in stitches and designs

Installation & Setup

Unpack and inspect all components. Place on stable sewing table.

Remove packaging materials and protective covers
Attach embroidery unit: Align and click into position
Install foot controller: Plug into designated port
Connect power cord: Plug into machine and wall outlet
Install needle and thread according to threading diagram
Wind and install bobbin

WARNING! Machine is heavy; use proper lifting technique. Ensure stable surface before operation.

First-Time Operation

Power on machine; follow initial setup prompts on LCD screen.

Language selection: Choose preferred language from setup menu
Date and time: Set current date and time for file management
Basic settings: Configure default stitch settings and preferences
Test sewing: Perform test stitches on scrap fabric
Embroidery setup: Install embroidery hoop and test design

CAUTION! Always use proper needle for fabric type. Keep fingers away from moving parts.

Specifications

Sewing Space: 11 inches (280mm)
Maximum Speed: 1,000 stitches per minute
Built-in Stitches: 400+ stitches including utility, decorative, and quilting
Embroidery Area: Up to 9.1" x 11.8" (230mm x 300mm)
Needle Positions: Adjustable with 0.1mm precision
Memory: Extensive internal memory plus USB expansion
Display: 11-inch full-color LCD touch screen
Power Requirements: 120V AC, 60Hz
Weight: Approximately 35.3 lbs (16 kg)

Controls and Settings

Access functions via LCD touch screen or physical controls. Front Panel: POWER, START/STOP, NEEDLE UP/DOWN, THREAD CUTTER.

Screen Controls: Stitch selection, embroidery design browser, settings menu, file manager, editing tools.

Stitch Settings: Length, width, tension, mirroring, memory save/recall. Embroidery: Design selection, editing, resizing, rotation, color sequence. System: Language, date/time, sound, screen brightness, maintenance reminders.

Connecting Accessories

USB: For design transfer and software updates. Embroidery Unit: Click-in installation. Foot Controller: Standard pedal connection.

Turn off machine before connecting accessories
Align embroidery unit with machine markings
Insert USB devices before powering on
Ensure proper connection of all cables

Tip: Use only Janome-approved accessories for optimal performance.

Sewing and Embroidery Functions

Supports extensive sewing and embroidery operations.

Basic Sewing: Select stitch, adjust settings, begin sewing
Decorative Stitches: Choose from built-in decorative patterns
Buttonholes: Automatic buttonhole functions with sensor
Quilting: Use AcuFeed for even quilt stitching
Embroidery: Load design, hoop fabric, start embroidery
Monogramming: Built-in alphabet fonts and editing
Memory Functions: Save and recall custom stitch combinations
Editing: Resize, rotate, and combine embroidery designs

WARNING! Always use proper hoop and stabilizer for embroidery. Keep hands clear of moving embroidery unit.

Memory and Storage

Internal Memory: Save custom stitches and settings. USB Storage: Import/export designs and patterns. File Management: Organize projects and designs through touch screen interface.

Care & Maintenance

Unplug before cleaning. Regular oiling as per manual. Clean lint from bobbin area and feed dogs.

CAUTION! Use only Janome-approved oil. Do not use compressed air for cleaning.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2024 Janome; all rights reserved. For support, visit www.janome.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not starting	Power connection	Check power cord; ensure machine is plugged in; check outlet
Thread breaking	Tension/needle issues	Check thread tension; replace needle; ensure proper threading
Uneven stitches	Tension/feeding	Adjust tension; clean feed dogs; check presser foot pressure
Embroidery errors	Hooping/stabilizer	Re-hoop fabric; use proper stabilizer; check design file
Screen not responding	Software/connection	Restart machine; check for updates; clean screen surface

Reset: System menu > Factory Reset if available (back up data first).

Service: Contact authorized Janome service center; www.janome.com