Janome Horizon Memory Craft 7700QCP Manual

The Janome Horizon Memory Craft 7700QCP is a high-performance computerized sewing machine featuring 270 built-in stitches, 11 one-step auto-size buttonholes, AcuFeed Flex™ even-feed system, automatic thread cutter, needle threader, speed control slider, large 11-inch sewing space, built-in memory for stitch patterns, and advanced quilting capabilities. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Advanced Functions 8. Maintenance & Care 9. Accessories 10. Troubleshooting

Features at a Glance

Key components: LCD touch screen, stitch selection dial, automatic needle threader, built-in thread cutter, AcuFeed Flex™ system, knee lifter, drop feed, and extensive accessory storage.

Feature	Description
Built-in Stitches	270 stitches including utility, decorative, and quilting stitches
Buttonholes	11 one-step auto-size buttonholes
Sewing Space	11-inch arm space for large projects
AcuFeed Flex™	Even-feed system for multiple fabric layers
Automatic Thread Cutter	Cuts top and bobbin threads automatically
Needle Threader	Easy needle threading system
Speed Control	Adjustable sewing speed slider
Memory Function	Store and recall custom stitch combinations
LCD Screen	Full-color touch screen display
Knee Lifter	Hands-free presser foot lifting

Installation & Setup

Unpack and inspect all components. Place on stable sewing table.

Remove packaging materials and protective covers.
Install foot controller: Plug into machine port.
Set up thread stand: Position behind machine.
Connect power cord: Plug into machine and wall outlet.
Install needle: Ensure flat side faces back.
Wind bobbin: Follow bobbin winding instructions.

WARNING! Machine is heavy; use proper lifting technique. Ensure stable surface before operation.

First-Time Operation

Power on machine; follow initial setup prompts on LCD screen.

Thread machine: Follow numbered threading path.
Insert bobbin: Drop-in bobbin system with clear cover.
Select basic stitch: Use stitch selection dial.
Test sew: Use scrap fabric to check tension.
Adjust settings: Use LCD menu for stitch length/width.
Practice functions: Try automatic thread cutter and needle threader.

CAUTION! Keep fingers away from needle area during operation. Always turn off when not in use.

Specifications

Stitches: 270 built-in stitches
Buttonholes: 11 one-step auto-size
Sewing Speed: Up to 1,000 stitches per minute
Needle Positions: Adjustable left/right
Presser Feet: 9 included, snap-on style
Display: Full-color LCD touch screen
Memory: User-programmable stitch combinations
Power Requirements: 120V AC, 60Hz
Dimensions: 19.7" x 11.4" x 8.3"
Weight: 26.5 lbs

Controls and Settings

Access functions via LCD touch screen and physical controls. Front Panel: Power switch, stitch selection dial, reverse button, needle up/down.

LCD Functions: Stitch selection, stitch length/width adjustment, mirror imaging, memory save/recall, settings menu.

Basic Settings: Stitch length (0-5mm), stitch width (0-7mm), needle position, thread tension (0-9). Advanced: Speed control, automatic presser foot pressure, needle stop position, custom stitch memory.

Stitch Selection

270 built-in stitches organized by category:

Utility Stitches: Straight, zigzag, stretch, overcast
Decorative Stitches: Scallops, motifs, heirloom
Quilting Stitches: Stippling, echo quilting patterns
Alphabet: 2 fonts for monogramming
Buttonholes: 11 styles including keyhole, round, stretch

Tip: Use stitch preview on LCD screen before sewing.

Advanced Functions

Professional features for complex projects:

AcuFeed Flex™: Even feeding for quilting and layered fabrics
Memory Function: Save up to 50 stitch combinations
Mirror Imaging: Flip stitches horizontally or vertically
Automatic Thread Cutter: Cuts threads at touch of button
Needle Threader: Easy threading for difficult eyes
Knee Lifter: Raise presser foot hands-free
Drop Feed: For free-motion quilting and darning
Speed Control: Adjust maximum sewing speed

WARNING! Practice advanced functions on scrap fabric first.

Maintenance & Care

Regular maintenance ensures optimal performance.

Daily: Clean lint from bobbin area and feed dogs
Weekly: Oil hook race and moving parts (use Janome oil only)
Monthly: Check needle plate for burrs, replace if damaged
As needed: Replace needle after 8-10 hours of sewing
Storage: Cover machine when not in use

CAUTION! Unplug machine before cleaning or maintenance.

Accessories

Included accessories: 9 snap-on presser feet, assorted needles, bobbins, seam ripper, lint brush, screwdrivers, spool caps, auxiliary spool pin.

Accessory	Use
Walking Foot	Even feeding for quilting and thick fabrics
Zigzag Foot	General purpose sewing
Buttonhole Foot	Automatic buttonholes
Overedge Foot	Overcasting and seam finishing
Zipper Foot	Installing zippers and piping

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord; ensure foot controller plugged in
Thread breaking	Tension/needle issues	Rethread machine; check needle condition; adjust tension
Uneven stitches	Threading/bobbin	Rethread completely; check bobbin insertion
Fabric not feeding	Feed dogs lowered	Raise feed dogs; check presser foot pressure
Needle breaks	Wrong needle/bent needle	Replace needle; ensure correct type for fabric
Bobbin issues	Winding/insertion	Rewind bobbin evenly; ensure correct insertion

Reset: Turn machine off and on to reset computer functions.

Service: Contact authorized Janome dealer for technical support.