janome horizon memory craft 8900 qcp manual

The Janome Horizon Memory Craft 8900 QCP is a high-performance computerized sewing machine with advanced features including AcuFeed Flex™ even-feed system, 11-inch sewing space, 270 built-in stitches, automatic thread cutter, knee lifter, speed control slider, needle up/down function, built-in needle threader, and large LCD touch screen. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Large LCD touch screen, AcuFeed Flex™ system, automatic thread cutter, built-in needle threader, knee lifter, speed control slider, and extensive stitch library.

Installation & Setup

Unpack and inspect all components. Place on stable sewing table.

1. Remove packaging materials and protective covers
2. Install foot controller and power cord
3. Thread machine following numbered guide
4. Wind and insert bobbin
5. Connect to power source (120V AC)
6. Turn on power switch

WARNING! Machine is heavy; use proper lifting technique. Ensure stable surface placement.

First-Time Operation

Power on machine; familiarize with basic functions.

1. Select straight stitch using stitch selection dial
2. Practice on scrap fabric with different speeds
3. Test automatic thread cutter function
4. Practice with knee lifter for presser foot control
5. Experiment with needle up/down positioning
6. Test built-in needle threader

CAUTION! Always turn off power when threading or changing needles.

Specifications

• Stitches: 270 built-in stitches including utility, decorative, and alphabet
• Sewing Space: 11-inch throat space
• Stitch Width: Up to 9mm
• Stitch Length: Up to 5mm
• Speed: Up to 1,000 stitches per minute
• Display: Large LCD touch screen
• Memory: Stitch combination memory
• Power Source: 120V AC, 60Hz
• Weight: Approximately 26.5 lbs

Controls and Settings

Access functions via LCD touch screen and control panel. Front Panel: Power switch, stitch selection, reverse stitch, needle up/down, thread cutter.

LCD Functions: Stitch selection, stitch length/width adjustment, mirror image, memory functions, settings menu.

Basic Settings: Stitch length (0-5mm), stitch width (0-9mm), needle position, tension adjustment, speed control. Advanced Settings: Memory functions, custom stitch combinations, buttonhole settings, mirror imaging.

Stitch Selection

270 built-in stitches organized by categories.

1. Utility Stitches: Straight, zigzag, stretch, overcast
2. Decorative Stitches: Scallops, waves, motifs, quilting
3. Buttonholes: 13 automatic buttonhole styles
4. Alphabet: 3 font styles with upper/lower case
5. Manual Selection: Use stitch selection dial
6. Memory: Save custom stitch combinations

Tip: Always test stitches on scrap fabric before sewing project.

Advanced Functions

AcuFeed Flex™ system for even feeding of multiple layers.

1. Engage AcuFeed Flex™ lever for even feeding
2. Use knee lifter for hands-free operation
3. Program needle stop position (up/down)
4. Use automatic thread cutter after sewing
5. Create stitch combinations with memory function
6. Use mirror image for symmetrical designs
7. Adjust speed with control slider
8. Use start/stop button for foot control-free sewing

WARNING! Keep fingers away from moving parts during operation.

Maintenance & Care

Regular cleaning and oiling for optimal performance.

Daily: Clean lint from bobbin area and feed dogs. Monthly: Oil hook race and moving parts as per manual. Annual: Professional servicing recommended.

CAUTION! Unplug machine before cleaning or maintenance. Use only Janome recommended oils.

Accessories

Included accessories: Various presser feet, bobbins, needles, seam ripper, brush, screwdrivers, auxiliary spool pin.

Regulatory Information

UL Listed: Complies with safety standards. FCC Part 15: Class B digital device. Copyright © Janome America, Inc. For support, visit www.janome.com or contact 1-800-631-0183.

Troubleshooting

Reset: Turn power off/on to reset computer functions.

Service: 1-800-631-0183; www.janome.com