Janome JEM Gold 2 Technical Manual

The Janome JEM Gold 2 is a professional-grade sewing machine designed for precision stitching and advanced sewing applications. Featuring a powerful motor, advanced needle threading system, multiple stitch patterns, automatic tension control, built-in LED lighting, and intuitive digital controls. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Stitch Selection and Operation 8. Maintenance Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Professional sewing head, built-in LED work light, automatic needle threader, stitch selection dial, tension control system, foot pedal, accessory compartment.

Feature	Description
Automatic needle threader	Easy threading with push-button operation
Built-in LED lighting	Bright illumination for precise sewing
Stitch selection dial	Quick access to multiple stitch patterns
Tension control system	Automatic adjustment for perfect stitches
Foot pedal connector	For speed control during operation
Accessory compartment	Storage for presser feet and accessories
POWER button	Turns machine on/off
REVERSE stitch	Reinforces stitching at beginning/end
SPEED control slider	Adjusts maximum sewing speed
BOBBIN winding system	Quick and easy bobbin preparation

Installation

Unpack and inspect contents. Place on stable sewing table.

Remove packaging materials and protective covers.
Position machine on flat, stable surface at comfortable height.
Connect foot pedal to machine port.
Plug power cord into electrical outlet.
Install needle and thread according to threading diagram.

WARNING! Machine contains sharp needles and moving parts. Keep fingers away from needle area during operation.

First-Time Setup

Power on machine; follow initial setup procedure.

Thread machine: Follow numbered threading path on machine.
Wind bobbin: Place thread on spool pin and follow bobbin winding instructions.
Insert bobbin: Place bobbin in case with thread pulling counterclockwise.
Select basic stitch: Turn stitch dial to straight stitch position.
Test stitch: Place fabric under presser foot and test stitching.

CAUTION! Always turn off power when changing needles or performing maintenance.

Specifications

Machine Type: Professional Sewing Machine
Stitch Patterns: 20 built-in stitches including decorative
Motor: High-torque DC motor with speed control
Lighting: LED work light with adjustable brightness
Controls: Digital stitch selection, speed control, reverse stitch
Needle System: HAx1 professional needles
Bobbin: Class 15 transparent bobbin
Power Source: 120V AC, 60Hz
Weight: 12.5 lbs (5.7 kg)

Controls and Settings

Access functions via control panel and stitch selection dial. Front Panel: POWER, REVERSE, SPEED control, stitch length adjustment.

Stitch Selection: Turn dial to select from straight, zigzag, stretch, decorative stitches. Tension: Automatic adjustment with manual override available. Speed: Adjust maximum speed with control slider.

Basic Settings: Stitch length (0-4mm), stitch width (0-7mm), needle position (left/center/right). Advanced: Mirror imaging, memory functions for complex patterns.

Connecting Accessories

Various presser feet available for different sewing applications.

Turn off machine before changing accessories.
Raise presser foot lever and remove current foot.
Align new foot with presser bar and lower into position.
Lower presser foot to lock in place.
Select appropriate stitch setting for accessory.

Tip: Always use the correct presser foot for each sewing technique.

Stitch Selection and Operation

Supports multiple fabric types and sewing techniques.

Select stitch: Turn dial to desired stitch pattern.
Adjust settings: Set stitch length and width as needed.
Position fabric: Place under presser foot and lower foot.
Begin sewing: Press foot pedal gently to start.
Guide fabric: Keep hands on either side of presser foot.
Reverse: Press reverse button to secure stitching.
Finish: Raise needle, lift presser foot, remove fabric.
Special functions: Use mirror for symmetrical patterns, memory for repeating designs.

WARNING! Never pull fabric while needle is in material. Let feed dogs move fabric.

Maintenance Features

Automatic needle threader: Push lever to thread needle easily. Bobbin warning: Visual indicator shows when bobbin is low. Drop feed: Lower feed dogs for free-motion sewing.

Care & Cleaning

Unplug before cleaning. Remove lint and dust regularly with brush provided.

CAUTION! Use only recommended cleaning tools. Do not use compressed air or liquids near electronic components.

Regulatory Information

UL Listed: Certified for safety standards. FCC Part 15: Class B digital device compliant. Copyright © 2025 Janome; trademarks of Janome America, Inc. For technical support, visit www.janome.com or contact 1-800-631-0183.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not running	Power connection/pedal	Check power cord; ensure foot pedal is connected properly.
Thread breaking	Tension/needle issues	Check threading path; replace needle; adjust tension.
Uneven stitches	Tension/threading	Rethread both top and bobbin threads; clean race area.
Needle not moving	Thread jam	Turn off power; remove fabric; clear thread jam from hook area.
Bobbin issues	Insertion/winding	Ensure bobbin inserted correctly; rewind if uneven.

Reset: Turn machine off and on to reset electronic functions.

Service: 1-800-631-0183; www.janome.com