Janome JEM Gold 660 Manual

The Janome JEM Gold 660 is a compact, lightweight sewing machine designed for portability and ease of use. Featuring 15 built-in stitches, one-step buttonhole, automatic needle threader, built-in thread cutter, drop feed for free-motion sewing, adjustable stitch length and width, built-in accessory storage, and LED lighting. Powered by standard household outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Maintenance & Care 8. Accessories 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Compact sewing head, built-in stitch patterns, automatic needle threader, drop feed mechanism, accessory compartment.

Feature	Description
Built-in stitches	15 utility and decorative stitches
One-step buttonhole	Automatic buttonhole creation
Automatic needle threader	Easy threading with push-pull mechanism
Built-in thread cutter	Convenient thread cutting on machine
Drop feed	Free-motion sewing capability
LED lighting	Bright work area illumination
Stitch length control	Adjustable from 0-4mm
Stitch width control	Adjustable up to 5mm
Reverse stitch	Reinforce seams with reverse sewing
Accessory storage	Built-in compartment for feet and tools

Installation & Setup

Unpack and inspect contents. Place on stable, flat surface.

Remove machine from packaging: Lift carefully from carrying case.
Install foot control: Plug into machine port, place on floor.
Connect power: Plug power cord into machine and wall outlet.
Install needle: Loosen needle clamp, insert needle with flat side to back.
Wind bobbin: Follow bobbin winding instructions in manual.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

First-Time Operation

Power on machine; follow setup procedures.

Thread machine: Follow threading path indicated on machine.
Use needle threader: Push down lever, hook thread, pull back.
Insert bobbin: Drop-in bobbin system with clear cover.
Select stitch: Turn stitch selection dial to desired pattern.
Test sew: Use scrap fabric to test stitch settings.

CAUTION! Always start with needle in highest position. Use proper needle for fabric type.

Specifications

Machine Type: Compact mechanical sewing machine
Stitches: 15 built-in stitches
Buttonhole: One-step automatic
Stitch Length: 0-4mm adjustable
Stitch Width: Up to 5mm adjustable
Needle Threader: Automatic push-pull type
Feed System: Drop feed for free-motion
Lighting: LED work light
Power Source: Standard household outlet
Weight: Lightweight for portability

Controls and Settings

Main controls: Stitch selection dial, stitch length dial, stitch width dial, reverse button.

Stitch Selection: Turn dial to select from 15 built-in stitches including straight, zigzag, stretch, and decorative patterns.

Stitch Length: Adjust for fabric type - shorter for delicate, longer for basting.

Stitch Width: Control zigzag and decorative stitch width.

Reverse: Hold button to reinforce seams at beginning and end.

Stitch Selection

Available stitch patterns:

Straight stitch - basic sewing
Zigzag stitch - finishing edges
Blind hem stitch - invisible hems
Stretch stitch - knit fabrics
Decorative stitches - various patterns
Buttonhole - automatic one-step

Tip: Always test stitch on scrap fabric before sewing project.

Maintenance & Care

Regular maintenance ensures optimal performance.

Clean lint: Remove bobbin case and clean lint regularly.
Oil machine: Use sewing machine oil as directed in manual.
Change needle: Replace needle after 8-10 hours of sewing.
Cover machine: Use dust cover when not in use.

CAUTION! Unplug machine before cleaning or maintenance.

Accessories

Included accessories: Standard presser foot, zipper foot, buttonhole foot, darning plate, seam ripper, needles, bobbins, screwdriver, spool caps.

Additional feet available: Walking foot, quilting foot, blind hem foot.

Regulatory Information

UL listed for safety standards. Complies with applicable electrical safety regulations. Copyright © Janome America, Inc. For support, visit www.janome.com or contact customer service at 1-800-631-0183.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord connection; ensure foot control plugged in.
Thread breaking	Tension/needle	Check thread tension; replace needle; rethread machine.
Uneven stitches	Threading/tension	Rethread upper and lower threads; adjust tension.
Fabric not feeding	Feed dogs	Check feed dog position; clean feed dogs.
Needle threader not working	Position/thread	Ensure needle in highest position; use proper thread.

Reset: Turn machine off and on if electronic issues occur.

Service: 1-800-631-0183; www.janome.com