Janome JEM Silver 662 Manual

The Janome JEM Silver 662 is a compact, lightweight sewing machine designed for quilters and crafters. It features 62 built-in stitches, automatic needle threader, drop feed for free-motion sewing, built-in thread cutter, 7-piece feed dog, and a maximum sewing speed of 860 stitches per minute. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Maintenance & Cleaning 8. Accessories 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Compact sewing head, built-in stitch patterns, automatic needle threader, drop feed mechanism, built-in thread cutter, and accessory storage.

Feature	Description
Built-in stitches	62 stitch patterns including utility, decorative, and quilting stitches
Automatic needle threader	Easy needle threading with push-pull mechanism
Drop feed	Lower feed dogs for free-motion sewing and quilting
Built-in thread cutter	Convenient thread cutting on face plate
7-piece feed dog	Enhanced fabric feeding for various materials
Speed control	Adjustable sewing speed up to 860 SPM
Reverse stitch	Button for reinforcement stitching
Stitch length/width	Adjustable stitch dimensions
Presser foot pressure	Adjustable for different fabric types
Bobbin system	Top-loading, jam-resistant bobbin

Installation & Setup

Unpack and inspect all components. Place on stable, flat surface.

Remove packaging materials and protective covers from machine.
Install foot controller: Plug into machine's foot controller port.
Connect power: Plug power cord into machine and electrical outlet.
Wind bobbin: Follow bobbin winding instructions in manual.
Thread machine: Use automatic needle threader for easy threading.
Insert bobbin: Place bobbin in top-loading bobbin case.

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing needles.

First-Time Operation

Power on machine; select basic straight stitch for initial testing.

Select stitch: Turn stitch selection dial to straight stitch position.
Adjust stitch length: Set to medium length (2.5-3.0) for general sewing.
Test on scrap fabric: Use two layers of medium-weight cotton for testing.
Practice speed control: Use foot controller to control sewing speed.
Experiment with reverse: Press reverse button to reinforce stitches.

CAUTION! Always start with needle in highest position. Keep work area well-lit and organized.

Specifications

Machine Type: Compact electronic sewing machine
Built-in Stitches: 62 stitches
Stitch Width: Up to 5mm
Stitch Length: Up to 4mm
Speed: 860 stitches per minute maximum
Needle System: HAx1 standard
Bobbin: Top-loading, class SA156
Presser Feet: 4 included (zigzag, zipper, buttonhole, blind hem)
Automatic Features: Needle threader, thread cutter, bobbin winding
Power Requirements: 120V AC, 60Hz
Dimensions: Compact design for easy storage
Weight: Lightweight for portability

Controls and Settings

Main controls located on front and side panels. Stitch selection via rotary dial.

Front Panel: Stitch selection dial, stitch length dial, stitch width dial, reverse stitch button.

Side Panel: Power switch, light switch, bobbin winder, thread tension dial.

Stitch Length: Adjustable from 0-4mm. Stitch Width: Adjustable from 0-5mm. Thread Tension: Adjust for different fabrics and threads. Presser Foot Pressure: Adjustable for lightweight to heavy fabrics.

Stitch Selection

62 built-in stitches including utility, decorative, and quilting stitches.

Straight Stitches: For basic sewing, topstitching, and quilting
Zigzag Stitches: For finishing edges, appliqué, and stretch fabrics
Decorative Stitches: For embellishment and creative projects
Buttonhole Stitches: One-step automatic buttonholes
Blind Hem Stitches: For nearly invisible hemming
Quilting Stitches: Special stitches for quilt piecing and quilting

Tip: Always test stitches on scrap fabric before starting your project.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Daily cleaning: Brush out lint from bobbin area and feed dogs
Monthly oiling: Apply sewing machine oil to designated points
Needle replacement: Change needle after every project or 8 hours of sewing
Bobbin case cleaning: Remove and clean bobbin case regularly
Exterior cleaning: Wipe with soft, dry cloth only

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended sewing machine oil.

Accessories

Standard accessories included with Janome JEM Silver 662:

Zigzag Foot
Zipper Foot
Automatic Buttonhole Foot
Blind Hem Foot
Assorted Needles
Bobbin (class SA156)
Seam Ripper/Lint Brush
Screwdriver
Spool Holders
Instruction Manual

Safety Information

Important safety precautions for machine operation:

Always disconnect power when changing needles or cleaning
Keep fingers away from moving parts and needle area
Do not operate with damaged power cord
Use only recommended accessories and attachments
Keep work area clean and well-lit
Store machine out of reach of children
Avoid contact with water or other liquids

Regulatory Information

UL Listed: Complies with UL safety standards. FCC Compliance: Meets FCC requirements for electronic devices. Copyright © Janome America, Inc. For technical support and service, contact Janome America at 1-800-631-0183 or visit www.janome.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord connection; ensure foot controller is plugged in properly.
Thread breaking	Tension/thread quality	Adjust thread tension; use better quality thread; check for rough spots on needle.
Uneven stitches	Threading/tension	Re-thread machine completely; adjust tension settings; check needle insertion.
Fabric not feeding	Feed dogs lowered	Check feed dog position; raise feed dogs for normal sewing.
Needle breaks	Bent needle/wrong size	Replace needle; ensure correct needle size for fabric; check for proper insertion.
Bobbin issues	Winding/insertion	Rewind bobbin evenly; ensure bobbin inserted in correct direction.

Service: 1-800-631-0183; www.janome.com