Janome JP760 Manual

The Janome JP760 is a high-performance sewing machine featuring 60 built-in stitches, one-step buttonhole, automatic needle threader, drop feed for free-motion sewing, adjustable stitch length and width, built-in thread cutter, and multiple presser feet. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: LCD display, stitch selection dial, automatic needle threader, drop feed lever, built-in thread cutter, bobbin winding system, multiple presser feet.

Installation and Setup

Unpack and inspect contents. Place on stable sewing table.

1. Remove packaging materials and protective covers.
2. Place machine on flat, stable surface at comfortable height.
3. Connect foot control pedal to machine and power outlet.
4. Install needle following arrow direction.
5. Wind and insert bobbin according to diagram.
6. Thread upper thread through automatic needle threader.

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing accessories.

First-Time Operation

Power on machine; follow initial setup procedure.

1. Turn power switch to ON position.
2. Select basic straight stitch using stitch dial.
3. Practice on scrap fabric to test tension and stitch quality.
4. Adjust stitch length and width as needed for project.
5. Test automatic needle threader function.
6. Practice reverse stitching for seam reinforcement.

CAUTION! Always use proper needle for fabric type. Replace bent or damaged needles immediately.

Specifications

• Stitches: 60 built-in stitches
• Buttonhole: One-step automatic
• Needle Positions: Left, center, right
• Stitch Length: 0-4mm adjustable
• Stitch Width: 0-5mm adjustable
• Bobbin: Top-loading, class 15 transparent
• Presser Feet: 6 included standard feet
• Lighting: LED work light
• Power Source: Standard household outlet
• Warranty: 25-year limited warranty

Controls and Settings

Access functions via control panel and dials. Front Panel: Power switch, stitch selection dial, reverse stitch button, stitch length/width controls.

LCD Display: Shows selected stitch number, recommended foot, stitch length/width settings.

Stitch Selection: Turn dial to choose from 60 stitches. Stitch Length: Adjust from 0-4mm. Stitch Width: Adjust from 0-5mm for zigzag and decorative stitches. Reverse: Hold button for backstitching. Needle Position: Switch for left, center, or right positioning.

Stitch Selection

Choose from 60 built-in stitches for various sewing applications.

1. Basic Stitches: Straight, zigzag, stretch stitches
2. Decorative Stitches: Scallop, honeycomb, feather stitches
3. Buttonhole: One-step automatic sizing
4. Blind Hem: For invisible hemming
5. Overcast: For seam finishing
6. Elastic: For stretch fabrics

Tip: Refer to stitch guide chart for recommended uses and settings.

Maintenance and Care

Regular maintenance ensures optimal performance and longevity.

1. Clean lint and dust from bobbin area after each project
2. Oil moving parts as recommended in manual
3. Replace needles regularly (every 8-10 hours of sewing)
4. Store machine with cover when not in use
5. Use genuine Janome parts for replacements

CAUTION! Always unplug machine before cleaning or maintenance.

Accessories

Included accessories: All-purpose foot, zipper foot, buttonhole foot, blind hem foot, overedge foot, satin stitch foot, seam ripper, lint brush, needles, bobbins, screwdriver, spool caps.

Regulatory Information

UL listed for safety compliance. Manufactured to meet international quality standards. Copyright © Janome America, Inc. For technical support and service, contact authorized Janome dealers or visit www.janome.com.

Troubleshooting

Service: Contact authorized Janome service center for repairs. Customer support: 1-800-631-0183