janome js1008le manual

The Janome JS1008LE is a compact sewing machine with 8 built-in stitches, 4-step buttonhole, free arm capability, built-in thread cutter, stitch length and width adjustment, top drop-in bobbin system, and built-in LED light. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Compact sewing machine with free arm, LED light, stitch selection dial, reverse stitch button, foot pedal, accessory storage.

Installation

Unpack and inspect contents. Place on stable surface.

1. Remove machine from packaging: Lift machine from box carefully.
2. Attach foot pedal: Connect foot pedal cable to machine port.
3. Connect power: Plug power cord into machine and wall outlet.
4. Install accessories: Remove accessory compartment and install included feet.

WARNING! Machine contains sharp needles; handle with care. Ensure stable placement to prevent tipping.

First-Time Setup

Power on machine; follow setup procedures.

1. Thread machine: Follow threading guide printed on machine.
2. Wind bobbin: Use bobbin winder with thread spool.
3. Insert bobbin: Place bobbin in top drop-in bobbin case.
4. Select stitch: Turn stitch dial to desired pattern.
5. Test sew: Use scrap fabric to test stitch quality.

CAUTION! Keep fingers away from needle area during operation. Always turn off when not in use.

Specifications

• Stitches: 8 built-in stitches including straight, zigzag, and decorative.
• Buttonhole: 4-step buttonhole function.
• Stitch Length: Adjustable 0-4mm.
• Stitch Width: Adjustable up to 5mm for zigzag stitches.
• Bobbin: Top drop-in bobbin system.
• Free Arm: Yes, for cylindrical sewing.
• Lighting: Built-in LED light.
• Power Source: 120V AC, 60Hz.
• Included Accessories: All-purpose foot, zipper foot, buttonhole foot, seam ripper, needles, bobbins, spool caps.

Controls and Settings

Access controls via front panel dials and buttons.

Front Panel: Stitch selection dial, stitch length dial, reverse stitch button, power switch.

Stitch Selection: Turn dial to select from 8 stitches (straight, zigzag, stretch, blind hem, decorative). Stitch Length: Adjust from 0-4mm for different fabric types. Reverse Stitch: Press and hold for backstitching. Thread Tension: Adjust via tension dial (usually set to 4 for normal sewing).

Connecting Accessories

Presser feet: Snap-on system for easy changes.

1. Turn off machine before changing accessories.
2. Lift presser foot lever to release current foot.
3. Align new foot with presser bar and lower into place.
4. Lower presser foot to lock in position.

Tip: Ensure needle is in highest position when changing presser feet.

Basic Sewing Operations

Supports various fabrics and sewing techniques.

1. Straight stitch: Select stitch 1, adjust length as needed.
2. Zigzag stitch: Select stitch 2, adjust width for finishing edges.
3. Buttonhole: Use 4-step process with buttonhole foot.
4. Reverse stitching: Hold reverse button to reinforce seams.
5. Free arm sewing: Remove accessory compartment for cylindrical items.
6. Thread cutting: Use built-in thread cutter on face plate.

WARNING! Always disconnect power when changing needles or performing maintenance.

Maintenance Features

Built-in maintenance: Regular oiling points, easy needle replacement, bobbin case cleaning access.

Care & Cleaning

Unplug before cleaning. Remove lint from bobbin area regularly. Wipe exterior with dry cloth.

CAUTION! Do not use compressed air; can force lint deeper into mechanism. Never immerse in water.

Regulatory Information

UL Listed: Complies with safety standards for household use. Copyright © 2025 Janome; trademarks of Janome America, Inc. For support, visit www.janome.com or contact 1-800-631-0183.

Troubleshooting

Reset: Turn machine off and on to reset electronic functions.

Service: 1-800-631-0183; www.janome.com