Janome JW5622 Manual

The Janome JW5622 is a high-performance sewing machine featuring 60 built-in stitches, one-step buttonhole, automatic needle threader, drop feed for free-motion sewing, adjustable stitch length and width, built-in thread cutter, top loading bobbin system, and LED lighting. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading & Bobbin 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Sewing head with built-in stitches, automatic needle threader, bobbin system, stitch selection dial, feed dog control, and LED work light.

Feature	Description
Built-in stitches	60 utility, decorative, and stretch stitches
One-step buttonhole	Automatic buttonhole creation
Automatic needle threader	Easy needle threading system
Drop feed	Free-motion sewing capability
Top loading bobbin	Easy bobbin access and monitoring
Stitch length/width	Adjustable settings for customization
Built-in thread cutter	Convenient thread cutting
LED lighting	Bright work area illumination
Reverse stitch	Secure stitching at beginning/end
Speed control	Adjustable sewing speed

Installation & Setup

Unpack and inspect all components. Place on stable, level surface.

Remove packaging materials and protective covers
Install foot controller: Plug into machine port
Connect power: Plug power cord into machine and electrical outlet
Install needle: Ensure flat side faces back, tighten screw
Wind bobbin: Follow bobbin winding instructions
Thread machine: Follow threading path diagram

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

First-Time Operation

Power on machine; LED light should illuminate.

Select straight stitch: Turn stitch selection dial to position 1
Practice stitching: Use scrap fabric to test machine
Adjust stitch length: Start with medium setting (2.5)
Test reverse: Press reverse button to secure stitches
Experiment with speed: Use foot controller pressure
Try needle threader: Lower lever to thread needle automatically

CAUTION! Always use proper needle for fabric type. Replace bent or dull needles immediately.

Specifications

Stitches: 60 built-in stitches
Buttonhole: One-step automatic
Needle Threader: Automatic
Bobbin System: Top loading, jam-resistant
Stitch Length: Adjustable up to 5mm
Stitch Width: Adjustable up to 7mm
Lighting: LED work light
Feed Dog: Drop feed capability
Power Source: Standard household electrical outlet
Warranty: 25-year limited warranty

Controls and Settings

Main controls: Stitch selection dial, stitch length dial, stitch width dial, reverse button, bobbin winder.

Stitch Selection: Turn dial to select from 60 built-in stitches. Stitch Length: Adjust from 0-5mm. Stitch Width: Adjust from 0-7mm for zigzag and decorative stitches. Reverse: Press and hold for reverse stitching. Bobbin Winder: Push bobbin to right for winding.

Accessories included: Various presser feet, bobbins, needles, seam ripper, brush, screwdriver.

Stitch Selection

60 built-in stitches including:

Basic stitches: Straight, zigzag, stretch
Decorative stitches: Scallop, honeycomb, feather
Buttonhole: One-step automatic
Blind hem: For invisible hemming
Overcast: For seam finishing
Elastic: For knit fabrics

Tip: Always test stitch on scrap fabric before sewing project.

Threading & Bobbin

Proper threading ensures smooth operation.

Raise presser foot and needle to highest position
Follow numbered threading path on machine
Use automatic needle threader: Lower lever and hook thread
Wind bobbin: Place thread on spool pin, guide through tension, wind evenly
Insert bobbin: Drop into case with thread clockwise
Pull up bobbin thread: Hold needle thread, turn hand wheel

WARNING! Ensure machine is properly threaded to prevent jams and skipped stitches.

Maintenance & Care

Regular maintenance ensures optimal performance.

Clean lint: Remove bobbin case and brush out lint regularly
Oil machine: Use sewing machine oil as directed in manual
Change needles: Replace after 8-10 hours of sewing
Cover machine: Protect from dust when not in use
Professional service: Annual servicing recommended

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended oils.

Regulatory Information

UL listed for safety standards. Complies with FCC regulations for electromagnetic compatibility. Copyright © Janome America, Inc. For technical support and service, visit www.janome.com or contact 1-800-631-0183. Made for household use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Re-thread machine; adjust tension; check for burrs on needle
Skipped stitches	Wrong needle/dull needle	Replace needle; ensure correct needle for fabric type
Bobbin jams	Incorrect bobbin insertion	Remove and reinsert bobbin; clean bobbin area
Uneven stitches	Poor quality thread	Use high-quality thread; check threading path
Machine not running	Power connection	Check power cord; ensure foot controller is plugged in

Reset: Turn machine off and on if electronic issues occur.

Service: 1-800-631-0183; www.janome.com