janome magnolia 7318 sewing machine manual

The Janome Magnolia 7318 is a versatile mechanical sewing machine featuring 18 built-in stitches, 4-step buttonhole, drop feed for free-motion sewing, built-in needle threader, top loading bobbin system, and easy stitch selection dial. Suitable for beginners and experienced sewers alike, this machine offers reliable performance for various sewing projects. Below are key sections covering features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Technical Specifications 5. Controls and Functions 6. Stitch Selection Guide 7. Threading and Bobbin 8. Maintenance & Cleaning 9. Accessories Included 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: Mechanical sewing machine with built-in stitches, stitch selection dial, reverse stitch lever, stitch width/length controls, free arm, and accessory storage.

Feature	Description
Built-in stitches	18 stitches including straight, zigzag, stretch, and decorative
Buttonhole	4-step manual buttonhole
Drop feed	Free-motion sewing capability
Needle threader	Built-in automatic needle threader
Bobbin system	Top loading with clear cover
Stitch selection	Easy dial selection with stitch guide
Free arm	Convertible for sewing cuffs and sleeves
Stitch length	Adjustable from 0-4mm
Stitch width	Adjustable up to 5mm
Presser feet	Snap-on system for easy changes

Unpacking and Setup

Carefully unpack all components and place machine on stable surface.

Remove machine from packaging: Lift machine by base, not handwheel.
Attach power cord: Plug into machine and wall outlet (120V).
Install foot controller: Connect to machine port.
Set up accessory tray: Attach to free arm area.
Insert needle: Loosen needle clamp screw, insert needle with flat side to back.

WARNING! Machine is heavy; use both hands when lifting. Ensure stable work surface.

First-Time Operation

Power on machine; follow basic setup procedures.

Thread machine: Follow threading guide from spool to needle.
Wind bobbin: Place thread on spool pin, wind bobbin using bobbin winder.
Insert bobbin: Place bobbin in case, pull thread through slot.
Select stitch: Turn dial to desired stitch pattern.
Test sew: Use scrap fabric to test stitch quality and tension.

CAUTION! Keep fingers away from needle during operation. Always turn off when threading.

Technical Specifications

Stitches: 18 built-in stitches
Buttonhole: 4-step manual
Stitch Length: 0-4mm adjustable
Stitch Width: Up to 5mm adjustable
Needle Positions: Left, center, right
Presser Feet: Snap-on system
Bobbin: Top loading, Class 15 transparent
Power Supply: 120V, 60Hz
Machine Weight: Approximately 13.2 lbs (6 kg)
Warranty: 25-year limited warranty

Controls and Functions

Main controls located on front and side of machine.

Front Panel: Stitch selection dial, stitch width dial, stitch length dial, reverse stitch lever, bobbin winder.

Right Side: Handwheel, power switch, power cord socket, foot controller socket.

Needle Area: Needle clamp screw, presser foot lever, needle threader, feed dogs.

Free Arm: Accessory storage, removable flat bed extension.

Stitch Selection Guide

Stitch dial includes symbols and numbers for easy selection.

Straight stitch: Position 1-2, basic sewing
Zigzag stitch: Position 3-4, finishing edges
Blind hem: Position 5, invisible hems
Elastic stitch: Position 6-7, stretch fabrics
Decorative stitches: Position 8-18, embellishments
Buttonhole: Position A-D, 4-step process

Tip: Always test stitch on scrap fabric before sewing project.

Threading and Bobbin

Proper threading ensures smooth operation.

Raise presser foot and needle to highest position.
Place thread spool on spool pin.
Follow threading guide: Through tension discs, take-up lever, to needle.
Use needle threader: Lower lever, hook thread, pull through needle eye.
Wind bobbin: Place empty bobbin on winder, engage mechanism.
Insert bobbin: Drop into case, pull thread through slot.

WARNING! Ensure machine is off during threading. Keep hands clear of moving parts.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Clean lint: Remove needle plate, clean bobbin area with brush.
Oil machine: Use sewing machine oil on moving parts as directed.
Change needle: Replace after 8-10 hours of sewing or if damaged.
Check belt: Ensure proper tension and condition.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended oils.

Accessories Included

Standard accessories provided with machine.

Accessory	Purpose
All-purpose foot	General sewing
Zipper foot	Installing zippers
Buttonhole foot	Creating buttonholes
Blind hem foot	Invisible hemming
Bobbin (4)	Extra bobbins
Needles (3)	Assorted sizes
Seam ripper	Removing stitches
Brush	Cleaning lint
Screwdriver	Adjustments

Safety Information

Important safety precautions for operation.

Always unplug machine when not in use
Keep fingers away from needle during operation
Do not operate with damaged power cord
Use only recommended accessories
Keep work area well-lit and organized
Supervise children near operating machine
Avoid loose clothing and jewelry

For support, visit www.janome.com or contact 1-800-631-0183.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Needle breaks	Wrong needle/bent needle	Replace needle; ensure correct insertion
Thread bunching	Incorrect threading/tension	Re-thread machine; adjust tension
Machine won't run	Power/pedal issue	Check power connection; test foot controller
Uneven stitches	Thread tension	Adjust upper and bobbin tension
Fabric not feeding	Feed dogs lowered	Raise feed dogs for normal sewing
Skip stitches	Dull needle/wrong type	Change needle; use correct type for fabric

Service: 1-800-631-0183; www.janome.com