Janome MC9700 Manual

The Janome MC9700 is a high-performance computerized sewing machine with advanced features including 270 built-in stitches, automatic needle threader, built-in memory for custom stitches, adjustable sewing speed, automatic thread cutter, knee lifter, and advanced needle plate system. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation and Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection and Memory 7. Advanced Functions 8. Maintenance and Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: LCD display, automatic needle threader, built-in memory, knee lifter, advanced feed system, and comprehensive stitch library.

Feature	Description
Built-in Stitches	270 stitches including utility, decorative, and quilting stitches
Automatic Needle Threader	Easy one-step needle threading
LCD Display	Clear viewing of stitch selection and settings
Built-in Memory	Store custom stitch combinations
Automatic Thread Cutter	One-touch thread cutting
Knee Lifter	Hands-free presser foot lifting
Adjustable Speed Control	Precise speed adjustment for different fabrics
Needle Plate	AcuFeed Flex system for even feeding
Bobbin System	Top-loading jam-resistant bobbin
Stitch Width/Length	Adjustable up to 7mm width and 5mm length

Installation and Setup

Unpack and inspect all components. Place on stable sewing table.

Remove machine from packaging: Lift carefully from carrying case.
Install foot controller: Connect to machine port, plug into power.
Install needle: Loosen needle clamp screw, insert needle with flat side to back.
Wind bobbin: Place thread on spool pin, follow threading guide.
Thread machine: Follow automatic needle threader instructions.

WARNING! Machine is heavy; use proper lifting technique. Ensure stable surface before operation.

First-Time Operation

Power on machine; familiarize with basic controls.

Select basic stitch: Use stitch selection dial for straight stitch.
Test on scrap fabric: Practice stitching on fabric scrap.
Adjust tension: Test different tension settings for fabric type.
Practice speed control: Use foot pedal to control sewing speed.
Explore stitch patterns: Browse through built-in stitch library.

CAUTION! Keep fingers away from moving needle. Always use proper needle for fabric type.

Specifications

Stitches: 270 built-in stitches
Stitch Width: Up to 7mm
Stitch Length: Up to 5mm
Needle Positions: Adjustable left/right
Speed: Up to 1,000 stitches per minute
Memory: Built-in for custom stitches
Display: LCD with stitch preview
Bobbin: Top-loading jam-resistant
Power Source: 110-120V AC, 60Hz
Weight: Approximately 25.4 lbs (11.5 kg)

Controls and Settings

Access functions via LCD display and control buttons. Front Panel: Power switch, stitch selection, reverse stitch, needle up/down, automatic thread cutter.

LCD Display: Shows stitch selection, width, length, and memory functions.

Stitch Settings: Width adjustment (0-7mm), Length adjustment (0-5mm), Mirror imaging, Memory storage. Utility Functions: Reverse stitch, Needle position, Thread tension, Speed control, Automatic thread cutter.

Stitch Selection and Memory

Access 270 built-in stitches including utility, decorative, and quilting patterns.

Select stitch category: Use category buttons for utility, decorative, or quilting.
Choose specific stitch: Scroll through options using selection dial.
Adjust settings: Modify width and length as needed.
Save to memory: Press memory button to store custom combinations.
Recall memory: Access saved stitch combinations quickly.

Tip: Practice new stitches on scrap fabric before using on projects.

Advanced Functions

Advanced features for professional sewing results.

Automatic needle threader: Push lever for easy threading.
Knee lifter: Lift presser foot hands-free for pivoting.
Automatic thread cutter: Cut threads with single button press.
Needle up/down: Set needle stop position automatically.
Mirror imaging: Create symmetrical stitch patterns.
Speed control: Adjust maximum sewing speed.
AcuFeed Flex: Even feeding for multiple fabric layers.

WARNING! Always turn off power when changing needles or performing maintenance.

Maintenance and Cleaning

Regular maintenance ensures optimal performance and longevity.

Daily cleaning: Remove lint from bobbin area and feed dogs.
Monthly oiling: Apply sewing machine oil to designated points.
Needle replacement: Change needle after 8-10 hours of sewing.
Bobbin case cleaning: Remove and clean bobbin case regularly.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended oils.

Regulatory Information

UL Listed: Complies with safety standards for household sewing machines. FCC Part 15: Class B digital device; complies with interference limits. Copyright © 2025 Janome America, Inc. For support, visit www.janome.com or contact 1-800-631-0183.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord; ensure foot controller is plugged in properly.
Thread breaking	Tension/needle issues	Check thread tension; replace needle; ensure proper threading.
Uneven stitches	Tension/threading	Re-thread machine; adjust tension; check bobbin winding.
Needle threader not working	Position/obstruction	Ensure needle is in highest position; check for thread obstructions.
Fabric not feeding	Feed dogs/ presser foot	Check feed dog position; ensure presser foot is lowered.

Reset: Turn machine off and on to reset computer functions.

Service: 1-800-631-0183; www.janome.com