Janome Memory Craft 10000 Manual

The Janome Memory Craft 10000 is a high-end computerized sewing machine with advanced embroidery capabilities, built-in stitches, automatic thread tension, LCD display, memory function for storing custom designs, automatic needle threader, built-in monogramming fonts, and extensive embroidery hoop options. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation and Setup 3. Basic Operation 4. Technical Specifications 5. Controls and Functions 6. Embroidery Features 7. Stitch Selection and Adjustment 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: LCD touch screen display, automatic needle threader, built-in embroidery designs, USB port for design transfer, embroidery hoop system, bobbin winding system, and computerized stitch control.

Feature	Description
LCD Display	Touch screen for stitch selection and settings
Automatic Needle Threader	One-touch needle threading system
Built-in Stitches	Over 200 built-in stitches including utility, decorative, and quilting
Embroidery Capability	Built-in designs and custom design import via USB
Memory Function	Stores custom stitch combinations and designs
Automatic Thread Tension	Computer-controlled tension for perfect stitches
Bobbin System	Top-loading jam-proof bobbin
Speed Control	Adjustable sewing speed from slow to maximum
Needle Positions	Multiple needle positions for precise sewing
Monogramming	Built-in alphabet fonts for monogram creation

Installation and Setup

Unpack and inspect all components. Place on stable sewing table.

Remove packaging materials and protective covers from machine.
Install foot controller and connect power cord to machine and outlet.
Wind bobbin using built-in bobbin winder with desired thread.
Insert bobbin into bobbin case following threading diagram.
Thread upper thread using automatic needle threader.
Turn on machine and perform initial settings calibration.

WARNING! Machine is heavy; use proper lifting technique. Ensure stable surface to prevent tipping.

Basic Operation

Power on machine; familiarize with basic controls and functions.

Select stitch: Use LCD screen to choose from built-in stitch patterns.
Adjust settings: Modify stitch length, width, and tension as needed.
Thread machine: Follow automatic threading system for upper thread.
Insert bobbin: Load bobbin following directional arrows.
Begin sewing: Use foot controller or start/stop button.
Change presser feet: Use quick-change foot system for different applications.

CAUTION! Always turn off machine when changing needles or presser feet.

Technical Specifications

Machine Type: Computerized sewing and embroidery machine
Stitches: 200+ built-in stitches including utility, decorative, and quilting
Embroidery Area: Up to 180mm x 130mm with appropriate hoop
Maximum Sewing Speed: 820 stitches per minute
Needle Positions: Adjustable with 0.1mm precision
Display: Full-color LCD touch screen
Memory: Built-in memory for custom designs and settings
Connectivity: USB port for design transfer
Power Requirements: 120V AC, 60Hz
Dimensions: Standard sewing machine size with embroidery capability

Controls and Functions

Access all functions via LCD touch screen and physical control buttons.

Main Controls: Power switch, start/stop button, reverse stitch, needle up/down, speed control slider.

LCD Functions: Stitch selection, stitch editing, embroidery design selection, monogramming, memory functions, settings menu. Stitch Adjustment: Length (0-5mm), width (0-7mm), tension (automatic and manual). Utility Features: Automatic thread cutter, mirror imaging, stitch elongation, pattern combination.

Embroidery Features

Advanced embroidery capabilities with built-in designs and custom import.

Select embroidery hoop appropriate for design size.
Attach hoop to embroidery unit and secure fabric.
Choose design from built-in library or import via USB.
Position design using LCD screen alignment tools.
Select thread colors and loading sequence.
Start embroidery process; machine will prompt for color changes.
Monitor progress and make adjustments as needed.

Tip: Always use stabilizer appropriate for fabric type when embroidering.

Stitch Selection and Adjustment

Comprehensive stitch library with customization options.

Utility Stitches: Straight, zigzag, stretch, overcast, blind hem.
Decorative Stitches: Scallops, waves, leaves, flowers, geometric patterns.
Quilting Stitches: Specialty stitches for quilt piecing and decoration.
Buttonholes: Multiple automatic buttonhole styles with sensor function.
Monogramming: Built-in fonts with adjustable size and spacing.
Memory Function: Save frequently used stitch combinations.
Stitch Editing: Modify length, width, density, and appearance.

WARNING! Always test stitches on scrap fabric before sewing project.

Maintenance and Care

Regular maintenance ensures optimal performance and longevity.

Daily: Clean lint from bobbin area and feed dogs. Weekly: Oil machine according to lubrication points diagram. Monthly: Professional cleaning recommended for heavy use. Needle Replacement: Change needle after every 8 hours of sewing or for new project.

CAUTION! Unplug machine before performing any maintenance. Use only Janome recommended oils and supplies.

Regulatory Information

UL Listed: Complies with safety standards for household sewing machines. FCC Part 15: Class B digital device; complies with interference limits. Copyright © 2025 Janome; all rights reserved. For technical support and service, visit www.janome.com or contact authorized Janome dealer.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not starting	Power connection	Check power cord connection; ensure foot controller is plugged in properly.
Thread breaking	Tension/needle issues	Check thread tension; replace needle; ensure proper threading.
Uneven stitches	Tension settings	Adjust thread tension; check bobbin winding; clean feed dogs.
Embroidery design misaligned	Hoop placement	Re-hoop fabric ensuring proper tension; check design positioning.
LCD screen not responding	Software issue	Turn machine off and on; perform system reset if available.
Bobbin thread showing on top	Upper tension too tight	Reduce upper thread tension; check bobbin insertion.
Needle hitting throat plate	Needle bent or wrong size	Replace needle; ensure correct needle type for fabric.

Reset: Consult manual for system reset procedure if machine malfunctions.

Service: Contact authorized Janome service center for repairs; 1-800-631-0183