Janome Memory Craft 1001 Manual

The Janome Memory Craft 1001 is a versatile computerized sewing machine featuring 10 built-in stitches, one-step buttonhole, automatic needle threader, drop feed for free-motion sewing, built-in thread cutter, and easy stitch selection dial. Powered by standard household outlet with foot pedal control. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Technical Specifications 5. Controls and Functions 6. Stitch Selection Guide 7. Threading and Bobbin 8. Maintenance & Cleaning 9. Accessories Included 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: Computerized stitch selection panel, automatic needle threader, built-in thread cutter, drop feed mechanism, one-step buttonhole, free arm capability.

Feature	Description
Built-in stitches	10 essential stitches including straight, zigzag, and decorative
One-step buttonhole	Automatic buttonhole creation with consistent results
Automatic needle threader	Easy threading with push-button mechanism
Drop feed	Lower feed dogs for free-motion quilting and darning
Built-in thread cutter	Convenient thread cutting on machine body
Free arm	Removable extension table for sewing cuffs and sleeves
Stitch length dial	Adjustable stitch length from 0-4mm
Stitch width dial	Adjustable stitch width up to 5mm
Reverse stitch	Built-in reverse stitching for seam reinforcement
Foot pedal	Variable speed control for precise sewing

Unpacking and Setup

Carefully unpack all components and place on stable surface.

Remove machine from packaging: Lift from carrying case using handles.
Install foot pedal: Connect to power cord receptacle at machine rear.
Connect power: Plug into standard household outlet (120V).
Attach accessories: Install standard presser foot and needle.
Wind bobbin: Follow bobbin winding instructions in threading section.

WARNING! Machine is heavy; lift with both hands. Ensure stable work surface to prevent tipping.

First-Time Operation

Power on machine; familiarize with basic controls.

Thread machine: Follow numbered threading path with presser foot raised.
Insert bobbin: Place bobbin in case with thread unwinding counterclockwise.
Select stitch: Turn stitch selection dial to desired pattern.
Test sew: Use scrap fabric to test stitch quality and tension.
Adjust settings: Modify stitch length and width as needed for project.

CAUTION! Always turn off power when changing needles or performing maintenance.

Technical Specifications

Stitches: 10 built-in stitches including utility and decorative
Buttonhole: One-step automatic buttonhole
Stitch Length: Adjustable 0-4mm
Stitch Width: Adjustable up to 5mm
Needle System: HAx1 standard domestic needles
Presser Feet: Standard zigzag foot included
Bobbin: Class 15 transparent bobbin
Power Supply: 120V, 60Hz household current
Machine Weight: Approximately 15 lbs
Warranty: 25-year limited warranty

Controls and Functions

Main control panel features: Power switch, stitch selection dial, stitch length dial, stitch width dial, reverse stitch button.

Front Panel: Handwheel, bobbin winder, thread tension dial, presser foot lever, needle position button.

Stitch Selection: Turn dial to select from 10 built-in stitches. Stitch Length: Adjust from 0 (darning) to 4mm (basting). Stitch Width: Adjust zigzag and decorative stitch width. Reverse: Hold button for backstitching at beginning and end of seams. Needle Threader: Push lever down through needle eye for automatic threading.

Stitch Selection Guide

Available stitches: Straight stitch, zigzag stitch, three-step zigzag, blind hem stitch, stretch stitch, scallop stitch, overcast stitch, satin stitch, shell stitch, honeycomb stitch.

Straight stitch (1): General sewing, topstitching, seams
Zigzag stitch (2): Finishing edges, decorative work
Three-step zigzag (3): Stretch fabrics, mending
Blind hem (4): Nearly invisible hems on garments
Stretch stitch (5): Knits and stretch fabrics
Scallop (6): Decorative edge finishing
Overcast (7): Seam finishing to prevent fraying
Satin (8): Decorative dense zigzag
Shell (9): Hem finishing with scalloped edge
Honeycomb (10): Smocking and decorative stitching

Tip: Always test stitch on scrap fabric before starting project.

Threading and Bobbin

Proper threading ensures smooth operation and quality stitches.

Raise presser foot and needle to highest position.
Follow numbered threading path from spool pin to needle.
Use automatic needle threader: Push lever down through needle eye.
Wind bobbin: Place thread on spool pin, wrap around bobbin winder tension.
Insert bobbin: Drop into case with thread unwinding counterclockwise.
Pull up bobbin thread: Hold needle thread, turn handwheel toward you.

WARNING! Never force thread through tension discs; ensure presser foot is raised when threading.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Daily: Brush out lint from bobbin area and feed dogs. Weekly: Oil hook race and moving parts (use sewing machine oil only). Monthly: Clean tension discs with folded fabric strip. As needed: Replace needle after 8-10 hours of sewing.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended sewing machine oil.

Accessories Included

Standard accessories: Zigzag foot, buttonhole foot, zipper foot, blind hem foot, darning plate, seam ripper, lint brush, needles (assorted), bobbins (4), screwdriver, spool caps, instruction manual.

Warranty Information

25-year limited warranty covering mechanical parts. 5-year electronic components warranty. 1-year labor warranty. Warranty registration card included; must be mailed within 10 days of purchase. For service, contact authorized Janome dealer or visit www.janome.com. Customer service: 1-800-631-0183.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Re-thread completely; reduce tension; check for burrs on needle.
Skipped stitches	Wrong needle/damaged needle	Replace needle; ensure correct needle type for fabric.
Uneven stitches	Tension issues	Adjust upper tension; re-thread bobbin; clean tension discs.
Machine jams	Thread buildup	Remove bobbin case; clean hook area; re-thread properly.
No power	Power connection	Check power cord; ensure foot pedal connected; check outlet.
Poor buttonholes	Stabilizer needed	Use stabilizer; check stitch width; ensure proper foot attachment.

Reset: Turn power off and on to reset computerized functions.

Service: 1-800-631-0183; www.janome.com