Janome Memory Craft 14000 Manual

The Janome Memory Craft 14000 is a premium computerized sewing machine with advanced features including a large 7-inch LCD touch screen, 270 built-in stitches, automatic thread cutter, knee lifter, AcuFeed Flex™ even-feed system, built-in needle threader, and extensive embroidery capabilities. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Using Embroidery Features 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Large 7-inch LCD touch screen, automatic thread cutter, built-in needle threader, knee lifter, AcuFeed Flex™ system, embroidery unit, and extensive stitch library.

Feature	Description
LCD Touch Screen	7-inch color display for easy stitch selection and settings
Built-in Stitches	270 utility, decorative, and quilting stitches
Automatic Thread Cutter	One-touch thread cutting at start and end of sewing
AcuFeed Flex™ System	Even feed for multiple fabric layers
Knee Lifter	Hands-free presser foot lifting
Built-in Needle Threader	Automatic needle threading system
Embroidery Unit	Built-in embroidery capabilities with USB port
Memory Function	Stores custom stitch combinations
Speed Control	Adjustable sewing speed up to 1,000 stitches per minute
Needle Up/Down	Programmable needle position

Installation & Setup

Unpack and inspect all components. Place on stable sewing table.

Remove packaging materials and protective covers from machine.
Install foot controller and power cord into appropriate ports.
Attach embroidery unit if using embroidery features.
Plug power cord into grounded electrical outlet.
Install bobbin and thread machine following threading diagram.

WARNING! Machine is heavy; lift with care using both hands. Ensure stable surface to prevent tipping.

First-Time Operation

Power on machine; familiarize yourself with basic functions.

Turn power switch to ON position; LCD screen will illuminate.
Select basic straight stitch using touch screen controls.
Practice threading with built-in needle threader.
Test automatic thread cutter function.
Adjust stitch length and width settings.
Practice with speed control slider.

CAUTION! Keep fingers away from moving needle. Always use proper presser foot for selected stitch.

Specifications

Machine Type: Computerized Sewing and Embroidery Machine
Stitch Capacity: 270 built-in stitches
LCD Display: 7-inch full color touch screen
Maximum Sewing Speed: 1,000 stitches per minute
Embroidery Area: 7.9" x 11.8" (200mm x 300mm)
Needle Threader: Automatic built-in system
Thread Cutter: Automatic at start and end of sewing
Feed System: AcuFeed Flex™ even feed system
Power Requirements: 120V AC, 60Hz
Weight: 26.5 lbs (12 kg)

Controls and Settings

Access all functions via touch screen interface. Physical controls: Power switch, foot controller jack, hand wheel.

Touch Screen Functions: Stitch selection, embroidery patterns, stitch length/width, mirror imaging, memory functions, settings menu.

Basic Settings: Stitch length (0-5mm), stitch width (0-7mm), needle position, thread tension, sewing speed, automatic presser foot pressure. Advanced: Custom stitch combinations, embroidery editing, monogramming, pattern connecting.

Connecting Accessories

Standard accessories included: Various presser feet, bobbins, needles, seam ripper, cleaning brush, screwdrivers, auxiliary spool pin.

Ensure machine is turned off before attaching accessories.
Snap on presser feet by lifting lever and clicking into place.
Attach embroidery unit by aligning arrows and sliding into position.
Connect optional external thread stand for large cones.

Tip: Always use genuine Janome accessories for optimal performance.

Using Embroidery Features

Built-in embroidery designs plus USB import capability.

Attach embroidery unit and hoop fabric securely.
Select embroidery pattern from library or USB device.
Adjust size, position, and rotation as needed.
Load appropriate embroidery thread colors.
Start embroidery process; machine will stop for color changes.
Use editing functions to combine or modify designs.
Save custom designs to machine memory or USB.

WARNING! Never move embroidery unit during operation. Keep hands away from moving parts.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Clean lint from bobbin area after each project.
Oil machine according to maintenance schedule in manual.
Wipe exterior with soft, dry cloth.
Replace needle regularly (every 8-10 hours of sewing).
Check and clean feed dogs periodically.

CAUTION! Always unplug machine before cleaning or maintenance. Use only Janome recommended oils.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2024 Janome America, Inc.; all rights reserved. CE certified for European markets. For technical support, visit www.janome.com or contact 1-800-631-0183.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not starting	Power connection	Check power cord connection; ensure foot controller is plugged in properly.
Thread breaking	Tension/needle issues	Check thread tension; replace needle; ensure proper threading.
Uneven stitches	Tension/threading	Re-thread machine; adjust upper and lower thread tension.
Needle threader not working	Position/obstruction	Ensure needle is in highest position; check for thread obstructions.
Embroidery design misaligned	Hooping/fabric issues	Re-hoop fabric more securely; use stabilizer appropriate for fabric.
Error messages on screen	Mechanical issues	Consult error code in manual; reset machine by turning power off/on.

Reset: Turn power off and on to reset computer functions.

Service: 1-800-631-0183; www.janome.com for authorized service centers.