Janome Memory Craft 15000 Manual

The Janome Memory Craft 15000 is a high-end computerized sewing and embroidery machine featuring a large color touchscreen display, built-in embroidery designs, USB connectivity, automatic thread tension, needle threader, knee lifter, and advanced stitch capabilities. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation and Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Sewing and Embroidery 8. Maintenance Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Large color LCD touchscreen, built-in embroidery unit, automatic needle threader, knee lifter, USB port, built-in memory, bobbin winding system.

Feature	Description
Touchscreen Display	7-inch color LCD for easy navigation and design viewing
Built-in Embroidery Designs	Over 200 built-in embroidery designs and alphabets
Automatic Needle Threader	One-touch needle threading system
Knee Lifter	Hands-free presser foot lifting
USB Port	For importing custom designs and updates
Built-in Memory	Stores frequently used designs and settings
Bobbin Winding System	Automatic bobbin winding with thread cutter
Stitch Selection	Over 300 built-in stitches including decorative and utility
Thread Tension	Automatic thread tension adjustment
Speed Control	Adjustable sewing speed up to 1000 stitches per minute

Installation and Setup

Unpack and inspect all components. Place on stable sewing table.

Remove packaging materials and protective covers from machine.
Install foot controller and connect to machine.
Connect power cord to machine and wall outlet.
Install needle and thread according to threading diagram.
Wind and insert bobbin following on-screen instructions.

WARNING! Machine is heavy; use proper lifting technique. Ensure stable surface to prevent tipping.

First-Time Operation

Power on machine; follow on-screen setup wizard.

Select language: Choose from available languages in settings menu.
Calibrate touchscreen: Follow calibration prompts if required.
Thread machine: Use automatic needle threader for easy threading.
Test stitches: Use scrap fabric to test basic stitches and tension.
Explore embroidery: Load practice design to familiarize with embroidery functions.

CAUTION! Keep fingers away from moving needle. Always use proper needle for fabric type.

Specifications

Machine Type: Computerized Sewing and Embroidery Machine
Display: 7-inch Full Color LCD Touchscreen
Stitches: 300+ Built-in Stitches
Embroidery Designs: 200+ Built-in Designs
Embroidery Area: 7.9" x 11.8" (200mm x 300mm)
Maximum Speed: 1000 stitches per minute
Memory: Built-in plus USB expandable
Needle Positions: Adjustable left/right
Power Source: 120V AC, 60Hz
Weight: 35.2 lbs (16 kg)

Controls and Settings

Access functions via touchscreen or physical buttons. Front Panel: Power, Start/Stop, Reverse, Needle Up/Down.

Touchscreen: Stitch selection, embroidery design editing, settings menu, file management.

Sewing: Stitch length, stitch width, tension adjustment, mirror imaging. Embroidery: Design editing, resizing, rotating, combining designs. System: Language, sound, screen brightness, calibration. Memory: Save/load settings, import/export designs via USB.

Connecting Accessories

USB: For design transfer and software updates. Embroidery Unit: Built-in, no external connection needed.

Turn off machine before connecting accessories.
Insert USB device into designated port.
Follow on-screen prompts to access files.
For embroidery hoops, attach appropriate size for project.

Tip: Always use genuine Janome accessories for optimal performance.

Sewing and Embroidery

Supports various fabrics and embroidery techniques.

Select mode: Choose sewing or embroidery from main menu.
Load design: Select from built-in library or import via USB.
Hoop fabric: Secure fabric in embroidery hoop ensuring proper tension.
Start process: Press start button; machine will begin automatically.
Monitor progress: Watch display for completion status and any alerts.
Color changes: Machine will stop automatically for thread color changes.
Finishing: Remove hoop and trim jump threads carefully.

WARNING! Never leave machine unattended while operating. Keep long hair and loose clothing secured.

Maintenance Features

Automatic Maintenance Reminders: Oil and cleaning alerts. Built-in Diagnostics: System self-checks and error reporting.

Care & Cleaning

Unplug before cleaning. Use soft brush and lint roller for dust removal.

CAUTION! Use only recommended sewing machine oil. Avoid getting oil on electronic components.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2025 Janome; all rights reserved. For technical support, visit www.janome.com or contact 1-800-631-0183.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't power on	Power connection	Check power cord connection; ensure outlet is working.
Thread breaking frequently	Tension/needle issues	Check thread tension; replace needle; ensure proper threading.
Embroidery design misaligned	Hooping/stabilizer	Re-hoop fabric ensuring proper tension; use appropriate stabilizer.
Needle not moving	Thread jam	Turn off machine; remove bobbin case and clear any thread jams.
Touchscreen unresponsive	Calibration needed	Restart machine; perform touchscreen calibration in settings.

Reset: Settings > System > Factory Reset if available.

Service: 1-800-631-0183; www.janome.com