Janome Memory Craft 3000 Sewing Machine Manual

The Janome Memory Craft 3000 is a computerized sewing machine with 30 built-in stitches, one-step auto buttonhole, automatic needle threader, drop feed for free-motion sewing, adjustable stitch length and width, built-in needle plate window, top-loading bobbin system, and multiple presser feet. Features include reverse stitch button, speed control slider, stitch selection dial, and built-in thread cutter. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Computerized control panel, automatic needle threader, top-loading bobbin system, built-in stitch patterns, adjustable presser foot pressure.

Installation & Setup

Unpack and inspect all components. Place on stable sewing table.

1. Remove packaging materials and protective covers.
2. Install foot controller: Plug into machine port.
3. Connect power cord: Plug into machine and wall outlet.
4. Install needle: Loosen needle clamp screw, insert needle with flat side to back.
5. Wind bobbin: Follow bobbin winding instructions.
6. Thread machine: Follow threading path indicated on machine.

WARNING! Always unplug machine when changing needles or performing maintenance.

First-Time Operation

Power on machine; familiarize yourself with basic functions.

1. Select straight stitch: Turn stitch selection dial to straight stitch position.
2. Practice stitching: Use scrap fabric to test machine operation.
3. Adjust tension: Start with default setting (4-5) and adjust as needed.
4. Test auto buttonhole: Follow buttonhole instructions in manual.
5. Practice reverse stitching: Use reverse button to secure stitches.

CAUTION! Keep fingers away from moving needle. Always use proper needle for fabric type.

Specifications

• Stitches: 30 built-in stitches
• Buttonhole: One-step automatic
• Stitch Length: Adjustable up to 4mm
• Stitch Width: Adjustable up to 5mm
• Needle Positions: Multiple positions available
• Bobbin: Top-loading rotary hook system
• Presser Feet: Includes zigzag, zipper, buttonhole feet
• Power Supply: 110V, 60Hz
• Warranty: 25-year limited warranty

Controls and Settings

Control Panel: Stitch selection dial, stitch length dial, stitch width dial, reverse button.

Additional Controls: Power switch, foot controller port, bobbin winder, thread tension dial, presser foot lever, hand wheel.

Stitch Settings: Length (0-4mm), Width (0-5mm), Tension (0-9). Special Functions: Reverse stitch, needle up/down position, drop feed, automatic thread cutter.

Stitch Selection

30 built-in stitches including straight, zigzag, stretch, and decorative patterns.

1. Turn machine power on.
2. Select desired stitch using stitch selection dial.
3. Adjust stitch length and width as needed.
4. Test stitch on scrap fabric before sewing project.
5. Refer to stitch chart for recommended applications.

Tip: Always use appropriate needle and thread for selected stitch and fabric.

Advanced Functions

Auto Buttonhole: One-step automatic buttonhole with sensor.

1. Attach buttonhole foot.
2. Select buttonhole stitch.
3. Place fabric under foot.
4. Press foot controller - machine sews complete buttonhole automatically.

Free-Motion Sewing: Drop feed dogs for quilting and embroidery.

Needle Threader: Automatic threading system for easy needle threading.

WARNING! Always raise needle to highest position before threading.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Clean lint from bobbin area after each project.
2. Oil machine as recommended in maintenance schedule.
3. Check needle regularly - replace if bent or dull.
4. Clean exterior with soft, dry cloth.

CAUTION! Unplug machine before cleaning or maintenance. Use only Janome recommended oil.

Accessories

Standard accessories included with machine.

Regulatory Information

UL Listed: Certified for safety standards. FCC Compliance: Meets electromagnetic interference requirements. Copyright © 2025 Janome America, Inc. For technical support and service, contact authorized Janome dealers or visit www.janome.com. Warranty registration required for 25-year limited warranty coverage.

Troubleshooting

Service: Contact authorized Janome service center for repairs. 1-800-631-0183