janome memory craft 4000 manual free

The Janome Memory Craft 4000 is a computerized sewing machine featuring 50 built-in stitches, automatic needle threader, one-step buttonhole, adjustable stitch length and width, drop feed for free-motion sewing, built-in thread cutter, speed control slider, and LCD display. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation and Setup 3. First-Time Operation 4. Specifications 5. Controls and Functions 6. Stitch Selection 7. Advanced Features 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: LCD display, automatic needle threader, stitch selection dial, stitch width/length controls, drop feed lever, bobbin winding system, free arm capability.

Feature	Description
Built-in stitches	50 utility, decorative, and stretch stitches
Automatic needle threader	Easy threading with push-pull mechanism
One-step buttonhole	Automatic buttonhole sizing and stitching
LCD display	Shows selected stitch, length, and width settings
Drop feed	Lower feed dogs for free-motion sewing
Speed control slider	Adjustable sewing speed from slow to fast
Built-in thread cutter	Convenient thread cutting at front of machine
Free arm	Removable extension table for cylindrical sewing
Bobbin system	Top-loading jam-resistant bobbin
Stitch memory	Stores frequently used stitch combinations

Installation and Setup

Unpack and inspect all components. Place on stable, level surface.

Remove packaging materials and protective covers from machine.
Attach power cord to machine and plug into grounded electrical outlet.
Install foot controller and connect to machine.
Attach extension table for flat sewing surface.
Wind bobbin and thread machine following threading diagram.

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing needles.

First-Time Operation

Power on machine; follow initial setup procedures.

Thread machine: Follow numbered threading path from spool to needle.
Wind bobbin: Place thread on spool pin, guide through tension, and wind bobbin.
Insert bobbin: Drop bobbin into case with thread pulling counterclockwise.
Select stitch: Turn stitch selection dial to desired pattern.
Adjust settings: Set stitch length and width as needed.
Test stitch: Sew on scrap fabric to check tension and stitch quality.

CAUTION! Always start with needle in highest position. Use proper needle for fabric type.

Specifications

Stitches: 50 built-in stitches including utility, decorative, and stretch
Stitch Length: Adjustable up to 5mm
Stitch Width: Adjustable up to 7mm
Buttonholes: One-step automatic buttonhole
Needle Positions: Left, center, and right needle positions
Presser Feet: Multiple included feet for different applications
Bobbin: Top-loading, class 15 transparent bobbin
Power Supply: 120V AC, 60Hz
Warranty: 25-year limited warranty

Controls and Functions

Access functions via control panel and dials. Front Panel: Power switch, stitch selection dial, stitch length/width controls, reverse stitch button.

LCD Display: Shows selected stitch number, length, width settings, and error codes.

Stitch Selection: Turn dial to choose from 50 built-in stitches. Stitch Length: Adjust from 0-5mm for different fabric types. Stitch Width: Adjust from 0-7mm for decorative stitches. Reverse: Hold button for reinforcement stitching. Needle Up/Down: Programmable needle position.

Stitch Selection

Choose from 50 built-in stitches for various sewing applications.

Utility Stitches: Straight stitch, zigzag, stretch stitches for seams
Decorative Stitches: Scallops, waves, leaves for embellishment
Buttonhole: One-step automatic with memory function
Blind Hem: Special stitch for nearly invisible hems
Overcast: Prevents fabric fraying on raw edges

Tip: Always test stitch on scrap fabric before sewing project.

Advanced Features

Automatic Needle Threader: Push lever to thread needle easily. Drop Feed: Lower feed dogs for free-motion quilting and darning. Speed Control: Adjust maximum sewing speed with slider. Memory Function: Store favorite stitch combinations. Mirror Imaging: Create symmetrical decorative patterns.

Maintenance & Care

Unplug before cleaning. Regular maintenance ensures optimal performance.

Clean lint from bobbin area and feed dogs after each project
Oil machine according to manual instructions (every 3-6 months)
Replace needles regularly (every 8-10 hours of sewing)
Cover machine when not in use to prevent dust accumulation

CAUTION! Use only Janome recommended needles and accessories. Do not use compressed air for cleaning.

Regulatory Information

UL Listed: Complies with safety standards for household sewing machines. FCC Part 15: Class B digital device; complies with interference limits. Copyright © Janome America, Inc. For support, visit www.janome.com or contact 1-800-631-0183.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not running	Power connection	Check power cord; ensure machine is turned on; check foot controller connection.
Thread breaking	Tension/thread quality	Re-thread machine; check tension settings; use quality thread.
Uneven stitches	Needle/thread mismatch	Replace needle; ensure proper needle for fabric; check threading.
Fabric not feeding	Feed dogs lowered	Raise feed dogs; check stitch length setting; clean feed dogs.
Bobbin issues	Incorrect winding/insertion	Rewind bobbin evenly; ensure bobbin inserted correctly in case.

Reset: Turn machine off and on to reset computer functions.

Service: 1-800-631-0183; www.janome.com