The Janome Memory Craft 4000 is a computerized sewing machine featuring 50 built-in stitches, one-step buttonhole, automatic needle threader, drop feed for free-motion sewing, speed control slider, built-in needle plate thread cutter, memory function for stitch patterns, and LCD display. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.
Key components: LCD display, stitch selection dial, automatic needle threader, drop feed lever, speed control slider, bobbin winding system, built-in thread cutter.
| Feature | Description |
|---|---|
| Built-in Stitches | 50 utility, decorative, and stretch stitches |
| One-Step Buttonhole | Automatic buttonhole sizing and stitching |
| Automatic Needle Threader | Easy threading with push-button mechanism |
| Drop Feed | Lever for free-motion quilting and darning |
| Speed Control Slider | Adjustable sewing speed from slow to fast |
| Memory Function | Stores favorite stitch combinations |
| LCD Display | Shows stitch selection and settings |
| Built-in Thread Cutter | Convenient thread cutting on needle plate |
| Bobbin System | Top-loading jam-resistant bobbin |
| Stitch Length/Width | Adjustable for custom stitch settings |
Unpack and inspect contents. Place on stable sewing table.
WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing needles.
Power on machine; follow basic setup procedure.
CAUTION! Always use proper needle for fabric type. Replace bent or damaged needles immediately.
Access functions via control panel and stitch selection dial. Front Panel: Power switch, stitch selection dial, reverse stitch button, needle up/down button.
LCD Display: Shows stitch number, length, width, and memory settings. Stitch Selection: Turn dial to select from 50 built-in stitches. Memory Function: Store and recall up to 10 stitch combinations. Tension Control: Adjust thread tension dial (2-6 recommended range).
50 built-in stitches categorized by function.
Tip: Refer to stitch guide chart for recommended applications and settings.
Memory function stores stitch combinations for quick access.
WARNING! Always raise needle to highest position before changing settings or removing fabric.
Regular cleaning and lubrication ensures optimal performance.
CAUTION! Unplug machine before cleaning or maintenance. Use only Janome recommended oils.
Standard accessories included with Memory Craft 4000.
| Accessory | Function |
|---|---|
| All-purpose Foot | General sewing |
| Zipper Foot | Installing zippers |
| Buttonhole Foot | Automatic buttonholes |
| Blind Hem Foot | Nearly invisible hems |
| Satin Stitch Foot | Decorative satin stitching |
| Overedge Foot | Preventing fabric fraying |
| Additional Needles | Various sizes and types |
| Bobbin (4) | Extra bobbins |
| Seam Ripper | Removing stitches |
| Screwdrivers | Needle plate and foot changes |
UL Listed: Complies with UL safety standards. FCC Part 15: Class B digital device; complies with interference limits. Copyright © Janome America, Inc. All rights reserved. For support, visit www.janome.com or contact 1-800-631-0183. Made in Taiwan.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Machine won't start | Power connection | Check power cord; ensure foot controller is plugged in; check power switch. |
| Thread breaking | Tension/thread quality | Reduce tension; check for rough spots on needle; use quality thread. |
| Skipped stitches | Needle issues | Replace needle; ensure correct needle type; check needle installation. |
| Bobbin thread bunching | Bobbin threading | Rethread bobbin; ensure bobbin turns counterclockwise; clean bobbin area. |
| Uneven feeding | Presser foot pressure | Adjust presser foot pressure; clean feed dogs; check foot installation. |
| Noisy operation | Lint/lubrication | Clean lint from hook area; lubricate moving parts; check for loose parts. |
Reset: Turn power off and on to reset computer functions.
Service: 1-800-631-0183; www.janome.com