Janome Memory Craft 6500 Professional Manual

The Janome Memory Craft 6500 is a professional-grade computerized sewing machine featuring advanced stitch capabilities, automatic needle threading, built-in stitches, memory functions, adjustable speed control, LCD display, automatic thread cutter, and professional finishing options. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. Basic Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Advanced Functions 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Computerized control panel, LCD display, automatic needle threader, built-in stitches, memory functions, speed control slider, drop feed, knee lifter.

Feature	Description
Built-in stitches	Over 200 built-in stitches including utility, decorative, and quilting
Automatic needle threader	Easy threading with push-button operation
LCD display	Shows stitch selection, width, length, and settings
Memory function	Stores custom stitch combinations
Speed control slider	Adjustable sewing speed from slow to fast
Automatic thread cutter	One-touch thread cutting
Drop feed	For free-motion sewing and quilting
Knee lifter	Hands-free presser foot lifting
Needle up/down	Programmable needle position
Mirror image	Flip stitches horizontally

Installation & Setup

Unpack and inspect contents. Place on stable sewing table.

Remove packing materials: Remove all protective covers and tapes.
Install foot controller: Connect to machine port.
Connect power: Plug into appropriate AC outlet.
Wind bobbin: Follow bobbin winding instructions.
Thread machine: Use automatic needle threader for upper threading.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure stable surface placement.

Basic Operation

Power on machine; follow on-screen prompts.

Select stitch: Use stitch selection dial or buttons.
Adjust settings: Set stitch length and width as needed.
Thread machine: Use automatic needle threader.
Insert bobbin: Follow bobbin loading procedure.
Begin sewing: Use foot controller or start/stop button.

CAUTION! Keep fingers away from needle area during operation.

Specifications

Stitch Capacity: 200+ built-in stitches
Stitch Width: Up to 7mm
Stitch Length: Up to 5mm
Speed: Up to 1,000 stitches per minute
Needle Positions: Adjustable left/right
Display: LCD with stitch information
Memory: Custom stitch storage
Power Source: 120V AC, 60Hz
Weight: Approximately 26 lbs

Controls and Settings

Access functions via control panel buttons and dials.

Main Controls: Power switch, stitch selection dial, LCD display, speed control slider, reverse stitch button, needle up/down button, automatic thread cutter.

Stitch Settings: Length adjustment, width adjustment, mirror image, memory store/recall. Utility: Automatic needle threader, bobbin winding, drop feed, knee lifter attachment.

Stitch Selection

Over 200 built-in stitches including:

Utility stitches: Straight, zigzag, stretch, overcast
Decorative stitches: Scallops, waves, floral patterns
Quilting stitches: Specialty quilting patterns
Buttonholes: Multiple automatic buttonhole styles
Alphabet: Built-in monogramming fonts

Tip: Use stitch chart for reference and creative projects.

Advanced Functions

Memory function: Store and recall custom stitch combinations. Mirror imaging: Flip stitches horizontally. Needle positioning: Programmable needle up/down. Speed control: Adjustable sewing speed. Automatic features: Thread cutter, needle threader.

Maintenance & Cleaning

Unplug before cleaning. Regular maintenance ensures optimal performance.

Clean lint: Remove bobbin case and clean lint buildup
Oil machine: Use sewing machine oil as directed
Check needle: Replace bent or dull needles
Clean exterior: Use soft, dry cloth

CAUTION! Do not use compressed air; avoid liquid cleaners.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not running	Power connection	Check power cord; ensure machine is turned on.
Thread breaking	Tension/needle issues	Check thread tension; replace needle; rethread machine.
Uneven stitches	Threading/tension	Rethread upper and lower threads; adjust tension.
Needle threader not working	Position/obstruction	Ensure needle is in highest position; check for thread obstruction.
Bobbin issues	Winding/insertion	Rewind bobbin; ensure proper insertion in case.

Reset: Turn machine off and on to reset computer functions.

Service: 1-800-631-0183; www.janome.com