Janome Memory Craft 6500P Manual

The Janome Memory Craft 6500P is a high-performance computerized sewing machine featuring 50 built-in stitches, one-step auto-buttonhole, needle up/down function, automatic thread cutter, speed control slider, built-in needle threader, drop feed for free-motion sewing, and advanced memory functions. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. Basic Operation 4. Specifications 5. Controls and Functions 6. Stitch Selection 7. Advanced Features 8. Maintenance & Cleaning 9. Accessories 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: LCD display, stitch selection dial, automatic thread cutter, built-in needle threader, speed control slider, bobbin winding system, free arm capability.

Feature	Description
Built-in Stitches	50 utility, decorative, and stretch stitches
Auto Buttonhole	One-step automatic buttonhole
Needle Up/Down	Programmable needle position
Automatic Thread Cutter	Cuts top and bobbin threads automatically
Speed Control Slider	Adjustable sewing speed
Built-in Needle Threader	Easy needle threading system
Drop Feed	Free-motion sewing capability
Memory Function	Stores custom stitch combinations
LCD Display	Shows stitch selection and settings
Free Arm	For sewing sleeves and cuffs

Installation & Setup

Unpack and inspect contents. Place on stable surface.

Remove packaging materials and protective covers
Attach power cord to machine and plug into outlet
Install foot controller (if included)
Wind bobbin and insert into bobbin case
Thread machine using built-in needle threader
Select appropriate presser foot for your project

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing needles.

Basic Operation

Power on machine; follow these steps for basic sewing.

Select stitch using stitch selection dial
Adjust stitch length and width as needed
Place fabric under presser foot and lower foot lever
Press foot controller to begin sewing
Use reverse stitch button to secure seams
Use automatic thread cutter when finished

CAUTION! Always use the correct needle and thread for your fabric type.

Specifications

Stitches: 50 built-in stitches
Buttonholes: One-step automatic
Stitch Width: Up to 7mm
Stitch Length: Up to 5mm
Speed: Up to 820 stitches per minute
Needle Positions: Multiple positions available
Bobbin: Top drop-in style
Display: LCD with stitch information
Power Source: 120V AC, 60Hz
Weight: Approximately 25.4 lbs

Controls and Functions

Access functions via control panel and dials. Front Panel: Power switch, stitch selection dial, stitch width/length controls, reverse stitch button.

Control Panel: LCD display, memory buttons, auto thread cutter, needle up/down, speed control slider.

Stitch Settings: Adjust length (0-5mm), width (0-7mm). Memory Functions: Store custom stitch combinations for quick access. Speed Control: Adjust maximum sewing speed with slider control.

Stitch Selection

50 built-in stitches including utility, decorative, and stretch stitches.

Turn stitch selection dial to choose stitch pattern
View selected stitch on LCD display
Adjust stitch length and width as needed
Select appropriate presser foot for chosen stitch
Test stitch on scrap fabric before starting project

Tip: Refer to stitch guide in manual for recommended settings for each stitch type.

Advanced Features

Memory Function: Store up to 10 custom stitch combinations. Auto Buttonhole: Perfect buttonholes in one step. Needle Threader: Easy threading system. Automatic Thread Cutter: Cuts threads at touch of button.

Memory Function: Program stitch combinations for quick access
Auto Buttonhole: Measure button and create perfect buttonhole
Needle Up/Down: Set preferred needle stop position
Drop Feed: Lower feed dogs for free-motion quilting
Speed Control: Adjust maximum sewing speed

WARNING! Always practice new features on scrap fabric before using on projects.

Maintenance & Cleaning

Unplug machine before cleaning. Regular maintenance ensures optimal performance.

Clean lint from bobbin area after each project
Oil machine as directed in maintenance section
Wipe exterior with soft, dry cloth
Replace needles regularly
Check and clean feed dogs periodically

CAUTION! Use only Janome recommended oils and cleaners. Do not use compressed air.

Accessories

Standard accessories included: Various presser feet, bobbins, needles, seam ripper, screwdriver, brush, spool caps.

Accessory	Use
All-purpose Foot	General sewing
Zipper Foot	Installing zippers
Buttonhole Foot	Creating buttonholes
Overedge Foot	Preventing fabric fraying
Blind Hem Foot	Creating invisible hems

Regulatory Information

UL Listed: Certified for safety standards. FCC Compliance: Meets electromagnetic interference requirements. Copyright © 2025 Janome; trademarks of Janome America, Inc. For support, visit www.janome.com or contact 1-800-631-0183.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not running	Power connection	Check power cord; ensure machine is turned on.
Thread breaking	Tension/needle issues	Check thread tension; replace needle; rethread machine.
Uneven stitches	Threading/tension	Rethread machine; adjust tension settings.
Fabric not feeding	Feed dogs	Check feed dog position; clean feed dogs.
Needle breaking	Bent needle/wrong size	Replace needle; use correct needle for fabric.

Reset: Turn machine off and on to reset computer functions.

Service: 1-800-631-0183; www.janome.com