Janome Memory Craft 6600 Professional Manual

The Janome Memory Craft 6600 Professional is a high-performance computerized sewing machine featuring advanced stitch capabilities, automatic needle threader, built-in needle plate thread cutter, speed control slider, advanced needle up/down function, extension table, knee lifter, and multiple built-in stitches. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Advanced Functions 8. Maintenance & Care 9. Accessories 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Computerized control panel, Automatic needle threader, Built-in thread cutter, Extension table, Knee lifter, Drop feed, Speed control slider.

Feature	Description
Automatic needle threader	Easy threading with push-button operation
Built-in thread cutter	One-touch thread cutting at needle plate
Speed control slider	Adjustable sewing speed from 0 to 850 SPM
Knee lifter	Hands-free presser foot lifting
Extension table	Provides larger work surface for quilting
Drop feed	For free-motion sewing and darning
Memory function	Stores custom stitch patterns
Mirror image	Creates symmetrical stitch patterns
Start/stop button	Sewing without foot control
Needle up/down	Programmable needle position

Installation & Setup

Unpack and inspect all components. Place on stable surface.

Attach extension table: Slide into position on machine bed.
Install knee lifter: Connect to designated port on machine front.
Connect power: Plug foot control into machine, then plug power cord into outlet.
Thread machine: Follow threading diagram from spool to needle.
Insert bobbin: Wind bobbin and place in bobbin case.

WARNING! Machine is heavy; use proper lifting technique. Ensure stable work surface.

First-Time Operation

Power on machine; follow initial setup procedure.

Select basic stitch: Choose straight stitch for initial testing.
Adjust stitch length: Set to medium length (2.5-3.0).
Test on scrap fabric: Use two layers of medium-weight fabric.
Practice speed control: Use slider to adjust sewing speed.
Test automatic functions: Try needle threader and thread cutter.

CAUTION! Keep fingers away from needle area during operation. Always turn off when threading.

Specifications

Stitches: 170 built-in stitches including utility, decorative, and quilting
Maximum Speed: 850 stitches per minute
Stitch Width: Up to 7mm
Stitch Length: Up to 5mm
Needle Positions: Adjustable left/right
Automatic Features: Needle threader, thread cutter, tension
Memory: Stores custom stitch combinations
Work Space: 8.5" x 11.5" with extension table
Power Source: 120V AC, 60Hz
Weight: 24.5 lbs

Controls and Settings

Access functions via LCD screen and control buttons. Front Panel: Power switch, Start/stop button, Reverse stitch, Needle up/down.

Control Panel: Stitch selection buttons, Length/width adjustment, Memory buttons, Mirror image, Lock stitch, Speed control slider.

Basic Settings: Stitch length (0-5mm), Stitch width (0-7mm), Needle position (left/center/right), Tension adjustment (0-9). Advanced: Memory storage, Stitch combination, Buttonhole settings, Monogramming.

Stitch Selection

170 built-in stitches organized by category.

Utility stitches: Straight, zigzag, stretch, overcast
Decorative stitches: Scallops, waves, motifs
Quilting stitches: Traditional and decorative quilting patterns
Buttonholes: 6 styles including keyhole and stretch
Alphabet: 3 font styles for monogramming

Tip: Always test stitch on scrap fabric before sewing project.

Advanced Functions

Professional features for complex sewing tasks.

Memory function: Store and recall custom stitch combinations
Mirror imaging: Create symmetrical decorative patterns
Knee lifter: Raise presser foot hands-free for pivoting
Drop feed: Lower feed dogs for free-motion work
Speed control: Adjust maximum sewing speed
Needle stop: Program needle up or down when stopping
Automatic thread cutter: Cut threads at needle plate
Lock stitch: Automatically lock beginning/end of seams

WARNING! Practice advanced functions on scrap fabric before using on projects.

Maintenance & Care

Regular maintenance ensures optimal performance.

Daily: Clean lint from bobbin area and feed dogs
Weekly: Oil hook race and moving parts (use sewing machine oil only)
Monthly: Check needle plate for burrs, replace if damaged
As needed: Replace needle after 8-10 hours of sewing
Storage: Cover machine when not in use

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended oils.

Accessories

Included accessories for various sewing applications.

Accessory	Use
General purpose foot	Basic sewing
Zipper foot	Installing zippers
Buttonhole foot	Automatic buttonholes
Overedge foot	Overcasting and Serging
Quilting foot	Quilting and patchwork
Walking foot	Even feeding for multiple layers
Extension table	Large work surface
Knee lifter	Hands-free presser foot control

Regulatory Information

UL Listed: Complies with safety standards for household sewing machines. FCC Part 15: Class B digital device; complies with interference limits. Copyright © Janome America, Inc. All rights reserved. For technical support, visit www.janome.com or contact 1-800-631-0183.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord; ensure foot control plugged in; check outlet.
Thread breaking	Tension/needle	Check threading path; reduce tension; replace needle.
Skipped stitches	Needle/thread	Replace needle; ensure correct needle type; check thread quality.
Uneven stitches	Tension/threading	Rethread completely; adjust tension; clean feed dogs.
Bobbin issues	Winding/insertion	Rewind bobbin evenly; ensure correct insertion direction.
Noise/vibration	Lint/thread jam	Clean bobbin area; remove any thread fragments; check for obstructions.

Reset: Turn machine off and on to reset computer functions.

Service: 1-800-631-0183; www.janome.com