Janome Memory Craft 6600P Manual

The Janome Memory Craft 6600P is a professional-grade computerized sewing machine with advanced features including 60 built-in stitches, automatic needle threader, built-in needle plate thread cutter, adjustable sewing speed, memory function for stitch patterns, automatic thread tension, built-in alphabet fonts, and LCD display. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: LCD display, automatic needle threader, built-in thread cutter, stitch selection dial, speed control slider, memory buttons, foot pedal, and accessory compartment.

Installation & Setup

Unpack and inspect contents. Place on stable sewing table.

1. Remove packaging materials and protective covers.
2. Place machine on flat, stable surface at comfortable height.
3. Connect foot pedal to machine and plug into power outlet.
4. Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten screw.
5. Wind bobbin: Place thread on spool pin, thread through bobbin winder tension, press foot pedal.
6. Insert bobbin: Open bobbin cover, insert bobbin following directional arrows.

WARNING! Machine is heavy; lift with care. Ensure stable surface before operation.

First-Time Operation

Power on machine; follow basic threading procedure.

1. Raise presser foot and needle to highest position.
2. Place thread spool on spool pin.
3. Follow threading guide: Through tension discs, take-up lever, and needle.
4. Use automatic needle threader: Push lever down and hook thread through needle.
5. Pull up bobbin thread: Hold upper thread, turn hand wheel toward you.
6. Select basic straight stitch for initial testing.
7. Place fabric under presser foot and begin sewing.

CAUTION! Keep fingers away from moving needle. Always use proper lighting.

Specifications

• Stitches: 60 built-in stitches including utility, decorative, and stretch
• Stitch Width: Up to 7mm
• Stitch Length: Up to 5mm
• Speed: Up to 1,000 stitches per minute
• Needle Positions: Adjustable left/right
• Presser Feet: 7 included snap-on feet
• Memory: Stores up to 10 stitch combinations
• Display: Backlit LCD screen
• Power Source: 120V AC, 60Hz
• Weight: 24.2 lbs (11 kg)

Controls and Functions

Access functions via control panel and dials. Front Panel: Power switch, stitch selection dial, reverse button, needle up/down button.

Control Panel: LCD display, memory buttons, stitch width/length adjustment, automatic thread cutter button, mirror image function.

Stitch Settings: Length (0-5mm), Width (0-7mm), tension (automatic), needle position. Memory: Store and recall stitch combinations. Utility: Reverse stitch, needle stop position, thread cutter, speed control.

Stitch Selection & Memory

Select from 60 built-in stitches including straight, zigzag, stretch, and decorative patterns.

1. Turn stitch selection dial to desired stitch number.
2. Adjust stitch length and width using +/- buttons.
3. Use mirror image button to flip stitch pattern.
4. Store combinations: Set stitch, press MEMORY button, select memory location (1-10).
5. Recall memory: Press MEMORY, select stored location number.
6. For buttonholes: Use automatic 1-step buttonhole function.

Tip: Test stitches on scrap fabric before sewing project.

Advanced Sewing Features

Advanced functions for professional results.

1. Automatic Needle Threader: Push lever down, hook thread, release lever.
2. Built-in Thread Cutter: Press button to cut threads at needle plate.
3. Needle Up/Down: Program needle to stop in up or down position.
4. Drop Feed: Lower feed dogs for free-motion work.
5. Alphabet Sewing: Select font, use arrow keys to enter text.
6. Speed Control: Adjust maximum speed with slider control.
7. Knee Lifter: Optional accessory for hands-free presser foot lifting.

WARNING! Always turn off power when changing needles or cleaning.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Brush out lint from bobbin area and feed dogs.
2. Weekly: Oil hook race and moving parts (use only Janome oil).
3. Monthly: Clean tension discs with folded fabric or dental floss.
4. Replace needle after 8-10 hours of sewing or for each new project.
5. Store machine with cover when not in use.

CAUTION! Unplug machine before cleaning or maintenance.

Accessories

Included accessories for various sewing techniques.

Safety Information

Important safety precautions for machine operation.

• Always disconnect power when changing needles, cleaning, or not in use
• Keep fingers away from moving needle and mechanical parts
• Use proper lighting to see sewing area clearly
• Do not place anything on foot pedal when not in use
• Use only Janome recommended accessories and supplies
• Keep machine dry and away from moisture
• Supervise children and inexperienced users

EMERGENCY: Turn power switch OFF immediately if machine malfunctions.

Troubleshooting

Reset: Turn power off and on to reset computer functions.

Service: Contact authorized Janome service center for repairs.