Janome Memory Craft 8000 Manual

The Janome Memory Craft 8000 is a high-performance computerized sewing machine featuring advanced embroidery capabilities, built-in stitches, automatic needle threading, LCD display, speed control, memory functions, and professional-grade construction. Designed for both home and professional use with versatile fabric handling and precision stitching. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Functions 6. Stitch Selection 7. Embroidery Functions 8. Maintenance & Cleaning 9. Accessories 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Computerized control panel, LCD display, Automatic needle threader, Built-in embroidery designs, Speed control slider, Memory functions, Drop feed for free-motion sewing.

Feature	Description
LCD Display	Shows stitch patterns, settings, and embroidery designs
Automatic Needle Threader	Easy threading with push-button operation
Built-in Stitches	Over 200 stitch patterns including utility, decorative, and quilting
Embroidery Capability	Built-in designs and optional card reader for additional patterns
Memory Function	Stores custom stitch combinations and embroidery sequences
Speed Control	Adjustable sewing speed from slow to maximum
Needle Up/Down	Programmable needle position
Automatic Thread Cutter	One-touch thread cutting
Drop Feed	For free-motion sewing and quilting
Buttonhole Styles	Multiple automatic buttonhole options

Installation & Setup

Unpack and inspect contents. Place on stable sewing table.

Remove packaging materials and protective covers from machine.
Install foot controller: Plug into designated port on machine.
Connect power: Plug power cord into machine and wall outlet.
Install needle: Loosen needle clamp screw, insert needle with flat side to back.
Wind bobbin: Follow bobbin winding instructions in manual.
Thread machine: Follow threading path indicated on machine.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure stable surface placement.

First-Time Operation

Power on machine; follow initial setup procedures.

Turn power switch to ON position.
Select basic straight stitch using stitch selection buttons.
Test sew on scrap fabric to check tension and stitch quality.
Adjust thread tension if necessary using tension dial.
Practice basic functions: Start/stop, reverse, speed control.
Explore built-in stitches using LCD display navigation.

CAUTION! Keep fingers away from needle area during operation. Always use proper lighting.

Specifications

Machine Type: Computerized Sewing and Embroidery Machine
Stitches: 200+ built-in stitches including utility, decorative, and quilting
Embroidery Designs: Built-in designs with optional expansion
Display: LCD screen with stitch and function indicators
Speed: Up to 850 stitches per minute
Needle Positions: Adjustable with programmable up/down function
Memory: Custom stitch and embroidery pattern storage
Bobbin: Top-loading with clear cover
Power Source: 120V AC, 60Hz
Weight: Approximately 25 lbs

Controls and Functions

Access functions via control panel buttons and LCD display. Front Panel: Power switch, Start/Stop button, Reverse stitch button, Needle up/down button.

Control Panel: Stitch selection buttons, Length/width adjustment, Memory functions, Embroidery mode, Speed control slider, Automatic thread cutter.

Stitch Settings: Length (0-5mm), Width (0-7mm), Mirror image, Twin needle capability. Memory: Store custom stitch combinations, Recall saved settings. Embroidery: Select designs, Adjust size and position, Multi-color sequencing.

Stitch Selection

Over 200 built-in stitches organized by category.

Press stitch category button (Utility, Decorative, Quilting, etc.)
Use arrow keys to browse stitch patterns on LCD display
Select desired stitch with OK/Enter button
Adjust stitch length and width as needed
Test stitch on scrap fabric before starting project
Use mirror function for symmetrical designs

Tip: Refer to stitch guide in manual for recommended applications and settings.

Embroidery Functions

Built-in embroidery designs with editing capabilities.

Select embroidery mode from control panel
Choose design from built-in library using navigation buttons
Hoop fabric securely in embroidery frame
Attach frame to machine and position properly
Select thread colors and load appropriate threads
Press start to begin embroidery process
Monitor progress on LCD display
Change threads when prompted for multi-color designs

WARNING! Always use proper hooping technique to prevent fabric shifting. Keep hands clear of moving parts.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Clean lint from bobbin area after each project
Oil machine as indicated in maintenance schedule
Wipe exterior with soft, dry cloth
Check needle regularly for damage or dullness
Clean feed dogs with small brush
Store machine with cover when not in use

CAUTION! Unplug machine before cleaning or maintenance. Use only Janome-approved lubricants.

Accessories

Standard accessories included with Janome Memory Craft 8000.

Accessory	Purpose
Standard Foot	General sewing
Zipper Foot	Installing zippers
Buttonhole Foot	Automatic buttonholes
Embroidery Foot	Machine embroidery
Quilting Foot	Quilting projects
Bobbin Case	Extra bobbin holder
Needles	Assorted sizes for different fabrics
Screwdrivers	For needle and foot changes
Spool Caps	For different thread spool types

Regulatory Information

UL Listed: Complies with safety standards for household sewing machines. FCC Part 15: Class B digital device; complies with interference limits. Copyright © Janome America, Inc. All rights reserved. Patents pending. For technical support and service, contact authorized Janome dealers or visit www.janome.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not starting	Power connection	Check power cord connection; ensure foot controller is plugged in properly.
Thread breaking	Tension/thread quality	Check thread tension; use quality thread; ensure proper threading.
Uneven stitches	Needle/tension issues	Replace needle; adjust tension; check bobbin threading.
Needle not moving	Thread jam	Turn power off; remove jammed thread; clean bobbin area.
Embroidery design errors	Hooping/thread issues	Re-hoop fabric securely; check thread tension and quality.
LCD display blank	Power/connection	Check power connection; ensure machine is turned on properly.

Reset: Turn machine off and on to reset computerized functions.

Service: Contact authorized Janome service center; 1-800-631-0183; www.janome.com