Janome Memory Craft 8900 Manual

The Janome Memory Craft 8900 is a high-performance computerized sewing machine with advanced features including 270 built-in stitches, automatic needle threader, built-in needle plate thread cutter, large sewing space, LCD touch screen display, memory function for custom stitch combinations, adjustable sewing speed, and automatic thread tension. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Advanced Functions 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: LCD touch screen, automatic needle threader, built-in thread cutter, drop feed, knee lifter, accessory storage, and advanced stitch memory system.

Feature	Description
LCD Touch Screen	For stitch selection and machine settings
Automatic Needle Threader	Easy threading with push-button operation
Built-in Thread Cutter	Automatic thread cutting at end of sewing
270 Built-in Stitches	Includes utility, decorative, and quilting stitches
Memory Function	Store custom stitch combinations
Adjustable Sewing Speed	Control sewing speed from slow to fast
Knee Lifter	Raise presser foot with knee control
Drop Feed	Lower feed dogs for free-motion sewing
Needle Up/Down	Programmable needle position
Automatic Thread Tension	Computer-controlled tension for perfect stitches

Installation & Setup

Unpack and inspect contents. Place on stable sewing table.

Remove machine from packaging: Lift carefully from carrying case.
Install foot controller: Plug into machine port.
Connect power: Plug power cord into machine and wall outlet.
Install needle: Loosen needle clamp screw, insert needle with flat side to back.
Wind bobbin: Follow bobbin winding instructions in manual.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure all connections are secure.

First-Time Operation

Power on machine; follow on-screen prompts.

Thread machine: Follow threading path indicated on machine.
Insert bobbin: Place bobbin in bobbin case with thread unwinding counterclockwise.
Select basic stitch: Use stitch selection buttons for straight stitch.
Test sew: Use scrap fabric to test stitch quality and tension.
Adjust settings: Use LCD screen to modify stitch length and width.

CAUTION! Keep fingers away from needle area during operation. Always turn off when not in use.

Specifications

Stitch Capacity: 270 built-in stitches
Stitch Width: Up to 7mm
Stitch Length: Up to 5mm
Sewing Speed: Up to 1,000 stitches per minute
Needle Positions: Adjustable left/right
LCD Display: Full-color touch screen
Memory: Stores custom stitch combinations
Bobbin: Top-loading, jam-resistant
Power Source: 120V AC, 60Hz
Warranty: 25-year limited warranty

Controls and Settings

Access functions via LCD touch screen or physical buttons. Front Panel: POWER, START/STOP, REVERSE, NEEDLE UP/DOWN.

LCD Functions: Stitch selection, stitch length/width adjustment, mirror imaging, memory functions, settings menu.

Basic Settings: Stitch length (0-5mm), stitch width (0-7mm), needle position, thread tension, sewing speed. Advanced Settings: Memory functions, custom combinations, automatic features, system preferences.

Stitch Selection

270 built-in stitches including utility, decorative, and quilting stitches.

Press stitch category button on LCD screen.
Scroll through stitch options using arrow keys.
Select desired stitch by touching screen.
Adjust stitch length and width as needed.
Use mirror function for symmetrical designs.
Save favorite combinations to memory.

Tip: Always test new stitches on scrap fabric before sewing project.

Advanced Functions

Memory Function: Store and recall custom stitch combinations. Automatic Features: Needle threader, thread cutter, tension control. Special Modes: Buttonhole, monogramming, quilting, embroidery.

Maintenance & Cleaning

Unplug before cleaning. Clean lint from bobbin area regularly. Oil machine as directed in manual.

CAUTION! Use only Janome recommended oil. Do not use compressed air for cleaning.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord connection; ensure foot controller is plugged in.
Poor stitch quality	Threading/tension	Re-thread machine; check bobbin; adjust tension settings.
Thread breaking	Needle/thread issues	Replace needle; use quality thread; check threading path.
Fabric not feeding	Feed dogs	Ensure feed dogs are raised; check presser foot pressure.
LCD screen blank	Power/brightness	Check power connection; adjust screen brightness in settings.

Reset: Turn machine off and on to reset computer functions.

Service: 1-800-631-0183; www.janome.com