Janome Memory Craft 9500 Manual

The Janome Memory Craft 9500 is a high-performance computerized sewing machine with advanced features including 250 built-in stitches, automatic needle threader, built-in needle plate, speed control slider, memory function, automatic thread cutter, and LCD screen. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation and Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Advanced Functions 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: LCD display, automatic needle threader, built-in needle plate, speed control slider, memory function, automatic thread cutter, stitch selection dial.

Feature	Description
LCD Display	Shows selected stitch, settings, and sewing information
Automatic Needle Threader	Easy needle threading with push-button operation
Built-in Needle Plate	Precision stitching guide with markings
Speed Control Slider	Adjustable sewing speed from slow to maximum
Memory Function	Stores favorite stitch combinations
Automatic Thread Cutter	One-touch thread cutting at end of seam
Stitch Selection Dial	Easy access to 250 built-in stitches
Start/Stop Button	Sew without foot control
Reverse Stitch Button	Reinforce stitching at beginning and end
Needle Up/Down Button	Programmable needle position

Installation and Setup

Unpack and inspect contents. Place on stable sewing table.

Remove machine from packaging: Lift carefully from carrying case.
Install foot control: Connect to machine port at right side.
Connect power: Plug power cord into machine and electrical outlet.
Install needle: Loosen needle clamp screw, insert needle with flat side to back.
Wind bobbin: Follow bobbin winding instructions in manual.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure all connections are secure.

First-Time Operation

Power on machine; follow setup procedure.

Thread machine: Follow threading path indicated by numbers and arrows.
Insert bobbin: Place bobbin in bobbin case with thread unwinding counterclockwise.
Select stitch: Turn stitch selection dial to desired stitch number.
Adjust settings: Use LCD menu for stitch length, width, and other parameters.
Test sew: Use scrap fabric to test stitch quality and tension.

CAUTION! Keep fingers away from needle area during operation.

Specifications

Stitches: 250 built-in stitches including utility, decorative, and quilting
Stitch Width: Up to 7mm maximum
Stitch Length: Up to 5mm maximum
Speed: Up to 1,000 stitches per minute
Needle Positions: Adjustable left, center, and right
Presser Feet: Multiple included for various sewing techniques
Memory: Stores up to 50 stitch combinations
Power Source: 120V AC, 60Hz
Weight: Approximately 26.5 lbs (12 kg)

Controls and Settings

Access functions via LCD screen and control buttons. Front Panel: Power switch, stitch selection dial, start/stop button, reverse stitch button.

LCD Controls: Stitch selection, length adjustment, width adjustment, mirror image, memory save/recall, needle position settings.

Basic Settings: Stitch length (0-5mm), stitch width (0-7mm), tension adjustment (0-9), needle position (left/center/right). Advanced Settings: Memory functions, automatic thread cutter settings, speed control limits, buttonhole settings.

Stitch Selection

250 built-in stitches organized by category.

Utility Stitches: Straight stitch, zigzag, stretch stitches, overcast stitches
Decorative Stitches: Scallops, waves, leaves, flowers, geometric patterns
Alphabet Stitches: Upper and lower case letters, numbers, symbols
Buttonholes: 7 different buttonhole styles including keyhole and stretch
Quilting Stitches: Special quilting stitches and decorative patterns

Tip: Refer to stitch chart in manual for complete stitch library.

Advanced Functions

Memory Craft 9500 includes advanced computerized features.

Memory Function: Save and recall up to 50 stitch combinations
Mirror Imaging: Create mirror images of stitches horizontally or vertically
Automatic Thread Cutter: Programmable automatic thread cutting
Needle Up/Down: Program needle to stop in up or down position
Speed Control: Adjust maximum sewing speed for different projects
Automatic Buttonhole: One-step automatic buttonholes in 7 styles
Stitch Elongation: Adjust stitch length for decorative effects
Combination Stitching: Combine multiple stitches in sequence

WARNING! Always test new stitch combinations on scrap fabric first.

Maintenance & Cleaning

Unplug machine before maintenance. Regular cleaning ensures optimal performance.

Daily: Remove lint from bobbin area and feed dogs
Weekly: Oil hook race and moving parts as indicated in manual
Monthly: Clean tension discs and check needle plate for burrs
As Needed: Replace needle regularly, check belt tension

CAUTION! Use only Janome recommended oil and accessories.

Regulatory Information

UL Listed: Certified for safety standards. FCC Part 15: Class B digital device; complies with interference limits. Copyright © 2025 Janome; trademarks of Janome America, Inc. For support, visit www.janome.com or contact 1-800-631-0183.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection/foot control	Check power cord connection; ensure foot control is plugged in properly.
Thread breaking	Tension/thread quality	Reduce upper tension; use better quality thread; check needle for burrs.
Uneven stitches	Threading/tension	Re-thread machine completely; adjust tension settings; clean feed dogs.
Needle breaks	Needle installation/fabric	Ensure needle inserted correctly; use proper needle for fabric type.
Bobbin issues	Bobbin winding/insertion	Rewind bobbin evenly; ensure bobbin inserted with thread unwinding correctly.

Reset: Turn machine off and on to reset computer functions.

Service: 1-800-631-0183; www.janome.com for authorized service centers