Janome Model 4400 Manual

The Janome Model 4400 is a versatile sewing machine featuring 40 built-in stitches, one-step buttonhole, automatic needle threader, drop feed for free-motion sewing, adjustable stitch length and width, built-in thread cutter, top-loading bobbin system, and multiple presser feet. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Maintenance & Cleaning 8. Accessories 9. Safety Information 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: 40 built-in stitches, automatic needle threader, one-step buttonhole, drop feed, top-loading bobbin, built-in thread cutter, multiple presser feet.

Feature	Description
Built-in stitches	40 different stitch patterns including utility, decorative, and stretch stitches
Automatic needle threader	Easy threading with push-pull mechanism
One-step buttonhole	Automatic buttonhole creation in single step
Drop feed	Lower feed dogs for free-motion sewing and quilting
Top-loading bobbin	Easy bobbin insertion with clear cover
Built-in thread cutter	Convenient thread cutting on machine face
Stitch length control	Adjustable from 0-4mm
Stitch width control	Adjustable from 0-5mm
Reverse stitch	Button for reinforcing stitches
Presser foot pressure	Adjustable for different fabric types

Installation & Setup

Unpack and inspect all contents. Place on stable sewing table.

Remove packaging materials and protective covers from machine.
Install foot control: Plug into machine and electrical outlet.
Install needle: Loosen needle clamp screw, insert needle with flat side to back.
Wind bobbin: Place thread on spool pin, guide thread through bobbin winding tension disk.
Thread machine: Follow numbered threading path on machine.

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing accessories.

First-Time Operation

Power on machine; test basic functions.

Select straight stitch: Turn stitch selection dial to position 1.
Set stitch length: Adjust to medium setting (2.5).
Practice on scrap fabric: Use both hands to guide fabric.
Test reverse: Hold reverse button to reinforce stitches.
Experiment with different stitches: Try zigzag and decorative stitches.

CAUTION! Always use proper needle for fabric type. Replace bent or damaged needles immediately.

Specifications

Stitches: 40 built-in stitches
Buttonhole: One-step automatic
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable
Needle Threader: Automatic
Bobbin: Top-loading, Class 15
Feed Dogs: Drop feed capability
Presser Feet: Multiple included
Power Source: Standard household electrical outlet
Dimensions: Standard sewing machine size

Controls and Settings

Main controls: Stitch selection dial, stitch length dial, stitch width dial, reverse stitch button, bobbin winder, thread tension dial.

Stitch Selection: Turn dial to choose from 40 built-in stitches. Stitch Length: Adjust for shorter/longer stitches. Stitch Width: Adjust for narrower/wider stitches. Thread Tension: Adjust for balanced stitches. Presser Foot Pressure: Adjust for different fabric thickness.

Stitch Selection

Choose from 40 built-in stitches for various sewing applications.

Utility stitches: Straight, zigzag, stretch stitches for basic sewing
Decorative stitches: Ornamental patterns for embellishment
Buttonhole: One-step automatic buttonhole
Blind hem: For nearly invisible hemming
Overcast: For finishing fabric edges

Tip: Always test stitch on scrap fabric before sewing project.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Clean lint buildup: Remove needle plate and clean bobbin area regularly
Oil machine: Apply sewing machine oil to designated points as instructed
Check needle: Replace bent or dull needles immediately
Clean exterior: Use soft, dry cloth only

CAUTION! Unplug machine before cleaning or maintenance. Use only sewing machine oil.

Accessories

Standard accessories included with Janome Model 4400.

Accessory	Purpose
All-purpose foot	General sewing
Zigzag foot	Zigzag and decorative stitches
Buttonhole foot	Automatic buttonholes
Zipper foot	Zipper installation
Button sewing foot	Sewing on buttons
Bobbin (extra)	Additional bobbins
Needles	Assorted replacement needles
Seam ripper	Removing stitches
Brush	Cleaning lint
Screwdriver	Needle plate removal

Safety Information

Important safety precautions for sewing machine operation.

Always unplug machine when not in use or during maintenance
Keep fingers away from moving needle
Use proper needle for fabric type
Do not pull fabric while sewing
Keep work area well-lit and organized
Supervise children when machine is in use

WARNING! Never operate machine with damaged cord or plug.

Warranty Information

Janome Model 4400 comes with limited warranty. Register product online at www.janome.com. Warranty covers manufacturing defects for specified period. Keep original receipt for warranty claims. For service, contact authorized Janome dealer.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord; ensure foot control plugged in; check outlet.
Thread breaking	Tension/needle issues	Rethread machine; check needle for damage; adjust tension.
Skipped stitches	Needle problems	Replace needle; ensure correct needle type; check threading.
Bobbin issues	Winding/insertion	Rewind bobbin; ensure proper insertion; check for lint.
Uneven stitches	Tension settings	Adjust upper and bobbin tension; rethread completely.

Service: Contact authorized Janome dealer for professional service.

Support: www.janome.com or customer service hotline