janome model 702 manual

The Janome Model 702 is a versatile sewing machine designed for home use, featuring 7 built-in stitches, drop feed for free-motion sewing, built-in buttonholer, stitch length and width adjustment, reverse sewing function, built-in thread cutter, and free arm capability. Powered by standard household electrical outlet. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Basic Sewing Operations 8. Maintenance Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Sewing machine head, foot pedal, power cord, accessory kit, instruction manual.

Feature	Description
Built-in stitches	7 different stitch patterns including straight, zigzag, and decorative
Drop feed mechanism	For free-motion sewing and darning
Built-in buttonholer	One-step automatic buttonhole function
Stitch length adjustment	Adjustable from 0-4mm
Stitch width adjustment	Adjustable from 0-5mm
Reverse sewing	For reinforcing seams
Built-in thread cutter	Convenient thread cutting on machine
Free arm capability	For sewing cylindrical items like sleeves and cuffs
Power/light switch	Turns machine and work light on/off
Foot pedal	Controls sewing speed

Installation

Unpack and inspect contents. Place on stable sewing table.

Remove machine from packaging: Lift carefully from carrying case.
Attach foot pedal: Connect to machine port at right side.
Connect power cord: Plug into machine and wall outlet.
Install needle: Loosen needle clamp screw, insert needle with flat side to back.
Wind bobbin: Follow bobbin winding instructions in manual.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

First-Time Setup

Power on machine; test basic functions.

Thread machine: Follow threading diagram on machine.
Insert bobbin: Place bobbin in bobbin case with thread unwinding clockwise.
Test stitches: Select different stitch patterns to ensure proper operation.
Adjust tension: Test on scrap fabric and adjust as needed.
Practice buttonhole: Make test buttonhole on scrap fabric.

CAUTION! Always start with needle in highest position. Use proper needle for fabric type.

Specifications

Stitch Selection: 7 built-in stitches
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable
Buttonhole: One-step automatic
Feed System: Drop feed with free-motion capability
Needle System: Standard 15x1 household needles
Bobbin: Class 15 transparent bobbin
Power Requirements: Standard household electrical outlet
Weight: Approximately 11 lbs (5 kg)

Controls and Settings

Access controls via front panel and dials. Stitch Selection Dial: Turn to select desired stitch pattern. Stitch Length Dial: Adjust from 0-4mm. Stitch Width Dial: Adjust from 0-5mm.

Additional Controls: Reverse Button, Power/Light Switch, Bobbin Winder, Handwheel.

Stitch Patterns: Straight stitch, zigzag stitch, blind hem stitch, stretch stitches, decorative stitches. Tension Adjustment: Upper thread tension dial (0-9). Presser Feet: Standard foot, zipper foot, buttonhole foot included.

Connecting Accessories

Standard accessories included: Various presser feet, bobbins, needles, screwdriver, lint brush.

Attach presser feet: Lift presser foot lever, align foot shank, lower lever to lock.
Change needles: Always turn power off. Loosen needle clamp screw, replace needle.
Install additional accessories: Follow specific instructions for each accessory.

Tip: Always unplug machine before changing needles or accessories.

Basic Sewing Operations

Supports various sewing techniques and fabric types.

Straight stitching: Select straight stitch, adjust length as needed.
Zigzag stitching: For finishing edges and decorative work.
Buttonholes: Use buttonhole foot and one-step function.
Free-motion sewing: Drop feed dogs for darning and quilting.
Reverse stitching: Hold reverse button to reinforce seams.
Gathering: Use longer stitch length and increased tension.
Blind hemming: Use blind hem foot and appropriate stitch.
Zipper insertion: Use zipper foot for precise placement.

WARNING! Never pull fabric while sewing. Let feed dogs move fabric naturally.

Maintenance Features

Built-in maintenance functions: Self-cleaning bobbin area, easy needle plate removal, accessible oiling points.

Care & Cleaning

Unplug before cleaning. Remove lint and dust regularly. Oil moving parts as recommended.

CAUTION! Use only sewing machine oil. Do not use household oils. Keep machine covered when not in use.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord connections; ensure foot pedal is plugged in.
Thread breaking	Tension/needle issues	Check thread tension; replace needle; ensure proper threading.
Skipped stitches	Needle problems	Replace needle; check needle insertion; use correct needle type.
Uneven stitches	Tension/bobbin	Adjust upper and bobbin tension; rewind bobbin evenly.
Machine jams	Thread buildup	Remove bobbin case and clean; rethread completely.

Reset: Turn power off and restart if electronic issues occur.

Service: Contact authorized Janome service center for repairs.