Janome My Style 22 Instruction Manual

The Janome My Style 22 is a compact, user-friendly sewing machine designed for beginners and hobbyists. It features 22 built-in stitches, a 4-step buttonhole, easy stitch selection dial, built-in thread cutter, free arm capability, and adjustable stitch length and width. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Stitch selection dial, stitch width dial, stitch length dial, reverse stitch button, thread tension dial, free arm, built-in thread cutter, drop feed for darning/quilting.

Installation & Setup

Unpack and inspect all contents. Place on stable, flat surface.

1. Remove machine from packaging: Lift machine by base, not handwheel.
2. Install foot controller: Plug into machine front port.
3. Connect power: Plug power cord into machine and wall outlet.
4. Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten screw.
5. Wind bobbin: Follow bobbin winding instructions in manual.
6. Thread machine: Follow threading diagram on machine.

WARNING! Always unplug machine when not in use and during needle/bobbin changes.

First-Time Operation

Plug in machine and turn on power switch.

1. Select straight stitch: Turn stitch selection dial to position 1.
2. Set stitch length: Turn length dial to 2.5 for medium stitch.
3. Practice on scrap fabric: Use two layers of medium-weight fabric.
4. Test reverse stitching: Hold reverse lever while sewing to reinforce.
5. Experiment with different stitches: Try zigzag and decorative stitches.

CAUTION! Keep fingers away from moving needle. Always use proper needle for fabric type.

Specifications

• Built-in Stitches: 22 stitches including utility and decorative
• Buttonhole: 4-step manual buttonhole
• Stitch Length: Adjustable 0-4mm
• Stitch Width: Adjustable up to 5mm
• Presser Feet: Standard zigzag foot included; snap-on system
• Free Arm: Yes, for sewing tubular items
• Bobbin: Front-loading, class 15 transparent bobbin
• Needle System: HAx1 standard domestic needles
• Power Source: Standard household electrical outlet
• Machine Weight: Approximately 5.5 kg (12 lbs)

Controls and Settings

Main controls located on front and right side of machine.

Stitch Selection: Turn dial to select desired stitch pattern (1-22). Stitch Length: Adjust for shorter/longer stitches (0-4mm). Stitch Width: Adjust zigzag and decorative stitch width (0-5mm). Reverse Stitch: Press and hold lever for backward sewing. Thread Tension: Adjust dial for proper stitch formation (2-4 for most fabrics).

Additional features: Built-in thread cutter, drop feed dog lever, presser foot pressure dial, free arm conversion.

Stitch Selection Guide

Stitch dial positions 1-22 with corresponding functions:

1. Straight stitch - Basic sewing, topstitching
2. Zigzag stitch - Finishing edges, appliqué
3. 3-step zigzag - Stretch fabrics, mending
4. Blind hem stitch - Nearly invisible hems
5. Stretch stitch - Strong seams for knits
6. Decorative stitch 1 - Scallop pattern
7. Decorative stitch 2 - Wave pattern
8. Decorative stitch 3 - Diamond pattern
9. Buttonhole position 1 - Right side
10. Buttonhole position 2 - Bottom side
11. Buttonhole position 3 - Left side
12. Buttonhole position 4 - Top side

Tip: Always test stitch on fabric scrap before sewing project.

Basic Sewing Operations

Step-by-step guide for common sewing tasks.

1. Straight stitching: Select stitch 1, set length 2.5, begin sewing.
2. Zigzag stitching: Select stitch 2, adjust width as needed.
3. Creating buttonholes: Follow 4-step process using positions 9-12.
4. Reverse stitching: Hold lever at beginning and end of seams.
5. Changing presser feet: Lift lever, remove current foot, snap on new foot.
6. Using free arm: Remove accessory storage compartment.
7. Drop feed dogs: Lower lever for free-motion work.
8. Thread cutting: Use built-in cutter on machine face.

WARNING! Never pull fabric while sewing - let machine feed fabric evenly.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Remove lint from bobbin area with brush provided.
2. Weekly: Oil hook race and moving parts (use sewing machine oil only).
3. Monthly: Clean feed dogs with small brush.
4. As needed: Replace needle after 8-10 hours of sewing.
5. Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Always unplug machine before cleaning or maintenance.

Accessories Included

Standard accessories packaged with machine:

• Zigzag foot (attached to machine)
• Buttonhole foot
• Zipper foot
• Button sewing foot
• Class 15 bobbins (3)
• Needles (assorted sizes)
• Seam ripper/lint brush
• Screwdriver
• Spool caps (large and small)
• Instruction manual

Safety Information

Important safety precautions for sewing machine operation.

• Always unplug machine when changing needles, bobbins, or cleaning
• Keep fingers away from moving needle
• Do not sew over pins - remove pins before sewing over them
• Use proper needle type and size for fabric being sewn
• Ensure adequate lighting in sewing area
• Keep machine away from water and moisture
• Do not operate with damaged power cord
• Supervise children when using sewing machine

Troubleshooting

Service: Contact authorized Janome dealer for professional service. Visit www.janome.com or call 1-800-631-0183 for support.