Janome My Style 30 Special Limited Edition Manual

The Janome My Style 30 Special Limited Edition is a compact, user-friendly sewing machine designed for beginners and hobbyists. It features 30 built-in stitches, one-step buttonhole, automatic needle threader, drop feed for free-motion sewing, built-in thread cutter, and easy stitch selection dial. Powered by standard household outlet, this lightweight machine is perfect for basic sewing projects, repairs, and creative crafts. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Compact sewing machine body, stitch selection dial, automatic needle threader, built-in thread cutter, free arm, accessory storage.

Installation & Setup

Unpack and inspect contents. Place on stable, flat surface.

1. Remove machine from packaging: Lift carefully from carrying case.
2. Set up workspace: Ensure adequate lighting and space around machine.
3. Connect foot control: Plug into machine port.
4. Connect to power: Plug power cord into machine and wall outlet.
5. Install needle: Loosen needle clamp screw, insert needle with flat side to back.
6. Wind bobbin: Follow bobbin winding instructions in manual.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

First-Time Operation

Power on machine; follow basic threading procedure.

1. Thread upper thread: Follow numbered threading path on machine.
2. Use needle threader: Push lever down and pull thread through needle eye.
3. Insert bobbin: Place bobbin in case with thread pulling counterclockwise.
4. Select stitch: Turn dial to desired stitch pattern.
5. Test sew: Use scrap fabric to test stitch quality and tension.
6. Adjust settings: Use stitch length and width dials as needed.

CAUTION! Always start with needle in highest position. Keep work area clean.

Specifications

• Stitches: 30 built-in stitches (utility, decorative, stretch)
• Buttonhole: One-step automatic buttonhole
• Stitch Length: 0-4mm adjustable
• Stitch Width: 0-5mm adjustable
• Needle Threader: Automatic push-pull type
• Feed System: Drop feed with free-motion capability
• Free Arm: Yes, with removable accessory storage
• Power Source: Standard household outlet
• Weight: Lightweight for easy transport
• Warranty: Limited 25-year warranty

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch selection dial, stitch length dial, stitch width dial, reverse stitch lever.

Side Features: Power switch, thread cutter, bobbin winder, handwheel.

Stitch Selection: Turn dial to select from 30 stitches including straight, zigzag, stretch, and decorative patterns. Stitch Length: Adjust for fabric type (shorter for delicate, longer for basting). Stitch Width: Adjust zigzag and decorative stitch width. Tension: Automatic tension control with manual override dial.

Stitch Selection

30 built-in stitches for various sewing applications.

1. Utility stitches: Straight, zigzag, blind hem, stretch
2. Decorative stitches: Multiple pattern options for creative projects
3. Buttonhole: Position 30 on dial for automatic one-step buttonhole
4. Specialty stitches: Elastic, overcast, and reinforcement stitches

Tip: Refer to stitch guide on machine for recommended applications.

Basic Sewing Operations

Step-by-step guide for common sewing tasks.

1. Straight stitching: Select position 1, adjust length as needed
2. Zigzag stitching: Select appropriate zigzag pattern, adjust width
3. Buttonhole: Mark position, select buttonhole stitch, follow automatic sequence
4. Reverse stitching: Hold reverse lever to reinforce seams
5. Free-motion sewing: Drop feed dogs for darning and quilting
6. Gathering: Use longer stitch length with tight upper tension

WARNING! Never pull fabric through machine - let feed dogs move fabric.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Remove lint from bobbin area and feed dogs
2. Weekly: Oil moving parts as specified in manual
3. Monthly: Clean entire machine exterior with soft cloth
4. As needed: Replace needle after 8-10 hours of sewing

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended oils.

Accessories

Included accessories for various sewing tasks.

Regulatory Information

UL listed for safety standards. Complies with international electrical safety requirements. Copyright © Janome America, Inc. All rights reserved. Janome is a registered trademark. For technical support and service, contact authorized Janome dealers or visit www.janome.com. Made for household use.

Troubleshooting

Service: Contact authorized Janome service center for repairs.

Support: www.janome.com or 1-800-631-0183