Janome New Home 1860 Manual

The Janome New Home 1860 is a versatile sewing machine designed for home use, featuring multiple stitch patterns, automatic needle threading, built-in buttonholer, adjustable stitch length and width, free arm capability, drop feed for darning and quilting, built-in LED light, and easy bobbin winding system. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Maintenance & Cleaning 8. Accessories 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main body with free arm, Bobbin case, Presser foot, Stitch selection dial, Tension control, Built-in LED light, Foot pedal control.

FeatureDescription
Automatic needle threaderEasy threading without eye strain
Built-in buttonholerOne-step automatic buttonholes
Free arm capabilityFor sewing cuffs and sleeves
Drop feed mechanismFor darning and free-motion quilting
Stitch selection dialMultiple built-in stitch patterns
Tension control dialAdjustable thread tension
Built-in LED lightBright illumination of work area
Reverse stitch leverFor reinforcing seams
Bobbin winding systemEasy bobbin preparation
Power and speed controlFoot pedal operated

Installation & Setup

Unpack and inspect all components. Place on stable, level surface.

  1. Remove protective covers and packaging materials
  2. Attach power cord to machine and plug into wall outlet
  3. Install needle according to markings (flat side to back)
  4. Wind and insert bobbin following threading diagram
  5. Thread upper thread through automatic needle threader

WARNING! Keep fingers away from needle area during operation. Always unplug when not in use.

First-Time Operation

Power on machine; test basic functions.

  1. Select straight stitch pattern on dial
  2. Place scrap fabric under presser foot
  3. Lower presser foot lever
  4. Gently press foot pedal to begin sewing
  5. Practice controlling speed with foot pedal
  6. Test reverse stitching function

CAUTION! Always start with scrap fabric. Ensure proper threading before operation.

Specifications

Controls and Settings

Main controls located on front and side panels. Stitch selection dial, Tension control, Reverse stitch lever, Presser foot lever.

Stitch Settings: Straight stitch, Zigzag, Decorative stitches, Stretch stitches, Buttonhole setting. Tension: Adjust for different fabric types (1-9 scale). Presser Foot Pressure: Adjustable for thick/thin fabrics.

Stitch Selection

60 built-in stitches including utility, decorative, and stretch stitches.

  1. Turn stitch selection dial to desired pattern
  2. Adjust stitch length and width as needed
  3. Select appropriate presser foot for stitch type
  4. Test stitch on scrap fabric first
  5. For buttonholes: Use one-step buttonhole foot
  6. For zippers: Use zipper foot attachment

Tip: Refer to stitch guide chart for recommended settings.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

  1. Unplug machine before cleaning
  2. Remove needle plate and clean lint buildup
  3. Oil moving parts as indicated in manual
  4. Wipe exterior with soft, dry cloth
  5. Store with needle in highest position
  6. Cover when not in use to prevent dust

CAUTION! Use only recommended sewing machine oil. Never use household oils.

Accessories

Standard accessories included with machine.

AccessoryPurpose
All-purpose footGeneral sewing
Zipper footInstalling zippers
Buttonhole footMaking buttonholes
Button sewing footAttaching buttons
Darning/Embroidery footFree-motion work
Seam ripperRemoving stitches
BrushCleaning lint
Extra needlesVarious sizes
Bobbin (extra)Additional bobbins
ScrewdriverNeedle plate removal

Regulatory Information

UL Listed: Complies with safety standards for household sewing machines. FCC Part 15: Class B digital device. Copyright © Janome America, Inc. For support, visit www.janome.com or contact 1-800-631-0183.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine not runningPower cord/switchCheck power connection; ensure switch is on; check foot pedal
Thread breakingTension/thread qualityReduce tension; use better quality thread; check needle
Skipped stitchesNeedle/thread mismatchReplace needle; ensure correct needle for fabric type
Bobbin issuesWinding/insertionRewind bobbin evenly; ensure correct insertion direction
Uneven stitchesTension/threadingRethread completely; adjust tension; clean race area
Noise during operationLint/mechanical issueClean thoroughly; check for obstructions; oil if needed

Service: 1-800-631-0183; www.janome.com

Janome New Home 1860 Manual © - All Rights Reserved 2025