janome pro 5124 manual

The Janome Pro 5124 is a 24-stitch mechanical sewing machine with built-in stitches, 4-step buttonhole, free arm capability, drop feed for free-motion sewing, built-in thread cutter, top-loading bobbin system, adjustable stitch length and width, reverse sewing, and built-in needle threader. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading & Bobbin 9. Maintenance & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 24 built-in stitches, 4-step buttonhole, free arm, drop feed, built-in thread cutter, top-loading bobbin, reverse stitch, needle threader.

Feature	Description
Built-in stitches	24 utility and decorative stitches including stretch stitches
4-step buttonhole	Easy buttonhole creation in four simple steps
Free arm capability	For sewing cuffs, sleeves, and other tubular items
Drop feed	For free-motion sewing and darning
Built-in thread cutter	Convenient thread cutting on the machine
Top-loading bobbin	Easy bobbin insertion and viewing
Reverse stitch	For reinforcing seams at beginning and end
Built-in needle threader	Easy needle threading with built-in mechanism
Stitch length control	Adjustable from 0-4mm
Stitch width control	Adjustable up to 5mm

Installation & Setup

Unpack and inspect contents. Place on stable surface.

Remove machine from packaging: Remove all protective materials and foam.
Attach accessory box: Slide accessory box into position on free arm.
Install foot control: Connect foot control to machine port.
Connect to power: Plug power cord into machine and wall outlet.
Install needle: Loosen needle clamp screw, insert needle with flat side to back.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure stable placement.

First-Time Operation

Power on machine; follow setup procedures.

Thread upper thread: Follow threading path marked on machine.
Wind bobbin: Place thread on spool pin, wind bobbin using bobbin winder.
Insert bobbin: Place bobbin in bobbin case with thread pulling counterclockwise.
Select stitch: Turn stitch selection dial to desired stitch pattern.
Test sew: Use scrap fabric to test stitch settings and tension.

CAUTION! Keep fingers away from needle area during operation.

Specifications

Stitches: 24 built-in stitches including utility and decorative
Buttonhole: 4-step manual buttonhole
Stitch Length: Adjustable 0-4mm
Stitch Width: Adjustable up to 5mm
Bobbin: Top-loading, Class 15 transparent bobbin
Needle: HAx1 sewing machine needle
Presser Feet: Includes zigzag foot, buttonhole foot, zipper foot
Power Source: 120V AC, 60Hz
Machine Weight: Approximately 13.2 lbs (6 kg)

Controls and Settings

Main controls: Stitch selection dial, stitch length dial, stitch width dial, reverse stitch button.

Stitch Selection: Turn dial to select from 24 built-in stitches. Stitch Length: Adjust from 0-4mm (0 for darning). Stitch Width: Adjust up to 5mm for zigzag and decorative stitches. Reverse: Hold button for reverse stitching. Bobbin Winder: Push bobbin winder to right for bobbin winding.

Stitch Selection

Select from 24 built-in stitches for various sewing applications.

Straight stitches: For basic sewing and seaming (stitches 1-3)
Zigzag stitches: For finishing edges and decorative work (stitches 4-6)
Stretch stitches: For knit fabrics and elastic materials (stitches 7-10)
Decorative stitches: For embellishment and special effects (stitches 11-24)
Buttonhole: Use 4-step process with buttonhole foot

Tip: Always test stitch on scrap fabric before sewing project.

Threading & Bobbin

Proper threading ensures smooth operation and quality stitches.

Upper threading: Follow numbered path from spool pin to needle.
Needle threading: Use built-in needle threader for easy threading.
Bobbin winding: Use bobbin winder with machine in winding position.
Bobbin insertion: Place bobbin with thread pulling counterclockwise.
Bring up bobbin thread: Hold upper thread, turn handwheel toward you.

WARNING! Ensure presser foot is raised when threading upper thread.

Maintenance & Cleaning

Unplug before maintenance. Clean lint and dust regularly.

Remove needle plate: Use screwdriver to remove screws and clean underneath.
Clean bobbin area: Remove bobbin case and clean lint accumulation.
Oil machine: Apply sewing machine oil to moving parts as directed.
Replace needle: Change needle after every project or 8 hours of sewing.

CAUTION! Use only sewing machine oil; never use household oils.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Re-thread machine; adjust tension; check for burrs on needle.
Needle breaking	Wrong needle/bent needle	Replace needle; ensure correct insertion; check for obstruction.
Uneven stitches	Tension issues/threading	Re-thread both upper and bobbin threads; adjust tension.
Machine not feeding	Feed dogs lowered/thread jam	Raise feed dogs; clean bobbin area; check for thread jam.
Bobbin thread not catching	Timing issues/threading	Re-thread bobbin; ensure bobbin inserted correctly.

Service: 1-800-631-0183; www.janome.com