Janome QC 6019 Manual

The Janome QC 6019 is a versatile sewing machine featuring 60 built-in stitches, one-step buttonhole, automatic needle threader, drop feed for free-motion sewing, built-in thread cutter, and easy stitch selection. Perfect for beginners and experienced sewers alike with its user-friendly design and comprehensive features. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: 60 built-in stitches, automatic needle threader, drop feed, built-in thread cutter, stitch selection dial, reverse stitch button, bobbin winding system.

Feature	Description
Built-in stitches	60 utility, decorative, and stretch stitches
One-step buttonhole	Automatic buttonhole sizing and stitching
Automatic needle threader	Easy threading with push-pull mechanism
Drop feed	Free-motion sewing capability
Built-in thread cutter	Convenient thread cutting on machine
Stitch selection dial	Easy stitch pattern selection
Reverse stitch button	Secure stitching at beginning and end
Bobbin winding system	Top-loading bobbin with clear cover
Stitch length/width adjustment	Customizable stitch settings
Free arm	For sewing cuffs and tubular items

Installation & Setup

Unpack and inspect contents. Place on stable sewing table.

1. Remove machine from packaging: Lift carefully from carrying case.
2. Install foot controller: Plug into machine port.
3. Connect power: Plug power cord into machine and wall outlet.
4. Install needle: Loosen needle clamp screw, insert needle with flat side to back.
5. Wind bobbin: Follow bobbin winding instructions.

WARNING! Keep fingers away from needle area during operation. Always unplug when not in use.

First-Time Operation

Power on machine; follow setup procedures.

1. Thread machine: Follow threading path indicated on machine.
2. Insert bobbin: Place bobbin in case with thread unwinding counterclockwise.
3. Select stitch: Turn dial to desired stitch pattern.
4. Test sew: Use scrap fabric to test stitch quality.
5. Adjust tension: If needed, adjust thread tension dial.

CAUTION! Always start with needle in highest position. Use proper needle for fabric type.

Specifications

• Stitches: 60 built-in stitches
• Buttonhole: One-step automatic
• Needle Threader: Automatic push-pull type
• Bobbin: Top-loading, class 15 transparent
• Stitch Length: Adjustable up to 5mm
• Stitch Width: Adjustable up to 7mm
• Presser Feet: 4 included (zigzag, zipper, buttonhole, button sewing)
• Power Source: 110V AC, 60Hz
• Machine Weight: 13.2 lbs (6 kg)
• Warranty: 25-year limited warranty

Controls and Settings

Main controls: Power switch, stitch selection dial, stitch length dial, stitch width dial, reverse stitch button.

Additional Features: Automatic needle threader, built-in thread cutter, drop feed lever, bobbin winding stopper.

Stitch Settings: Length (0-5mm), Width (0-7mm), Pattern selection (1-60). Tension: Adjustable upper thread tension (0-9). Presser Foot Pressure: Adjustable for different fabrics.

Stitch Selection

60 built-in stitches including:

1. Utility stitches: Straight, zigzag, stretch, blind hem
2. Decorative stitches: Scallop, honeycomb, diamond patterns
3. Buttonhole: One-step automatic with memory function
4. Overcasting: Built-in overcast stitches for seam finishing
5. Quilting: Straight stitch with even feed capability

Tip: Refer to stitch chart on machine for pattern numbers and applications.

Basic Sewing Operations

Step-by-step sewing procedures:

1. Thread machine: Follow numbered threading path
2. Insert bobbin: Drop into case, pull thread through slot
3. Select stitch: Turn dial to desired pattern
4. Adjust settings: Set length and width as needed
5. Position fabric: Lower presser foot, begin sewing
6. Reverse: Hold reverse button to secure stitches
7. Cut threads: Use built-in thread cutter

WARNING! Never pull fabric while sewing. Let feed dogs move fabric naturally.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Brush out lint from bobbin area and feed dogs
2. Weekly: Oil hook race and moving parts (use sewing machine oil only)
3. Monthly: Clean tension discs with soft brush
4. As needed: Replace needle after 8-10 hours of sewing

CAUTION! Always unplug machine before cleaning or maintenance.

Accessories

Standard accessories included:

• Zigzag foot
• Zipper foot
• Buttonhole foot
• Button sewing foot
• Seam ripper/lint brush
• Bobbin (4 extra)
• Needles (assorted sizes)
• Screwdriver
• Spool pin felt

Regulatory Information

UL Listed: Complies with UL safety standards. FCC Part 15: Class B digital device. Copyright © Janome America, Inc. All rights reserved. For technical support and service, contact authorized Janome dealers or visit www.janome.com. Made in Taiwan.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Rethread machine; adjust tension; check for burrs on needle
Skip stitches	Wrong needle/bent needle	Replace needle; ensure correct needle for fabric type
Bobbin thread bunching	Incorrect bobbin insertion	Remove and reinsert bobbin; check threading path
Machine not running	Power/pedal issues	Check power connection; ensure pedal is plugged in properly
Uneven stitches	Tension issues	Adjust upper and bobbin tension; clean tension discs
Needle threader not working	Timing/position	Ensure needle is in highest position; check for bent parts

Service: Contact authorized Janome service center. Do not attempt internal repairs.

Support: 1-800-631-0183; www.janome.com