Janome Quilters Companion 6125 Manual

The Janome Quilters Companion 6125 is a versatile sewing machine designed specifically for quilters, featuring 25 built-in stitches, one-step auto-size buttonhole, drop feed for free-motion quilting, built-in needle threader, top-loading bobbin system, adjustable stitch length and width, built-in thread cutter, and multiple presser feet including walking foot and darning foot. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Quilting Functions 8. Maintenance & Cleaning 9. Accessories 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: 25 built-in stitches, drop feed lever, built-in needle threader, top-loading bobbin, stitch length/width dials, reverse stitch button, free arm, LED work light.

Feature	Description
Built-in stitches	25 utility and decorative stitches including straight, zigzag, and quilting stitches
One-step buttonhole	Automatically creates perfectly sized buttonholes
Drop feed	Lowers feed dogs for free-motion quilting and darning
Built-in needle threader	Automatically threads needle for easy setup
Top-loading bobbin	Easy bobbin insertion with clear cover
Stitch length dial	Adjustable from 0-4mm
Stitch width dial	Adjustable from 0-5mm
Reverse stitch button	Reinforces stitching at beginning and end of seams
Free arm	Removable extension table for sewing sleeves and cuffs
LED work light	Bright illumination of work area

Unpacking and Setup

Unpack and inspect all contents. Place on stable, level surface.

Remove machine from packaging: Lift machine by base, not handwheel.
Attach extension table: Slide into position until it clicks.
Install foot controller: Plug into machine's foot control port.
Connect power: Plug power cord into machine and wall outlet.
Wind bobbin: Follow bobbin winding instructions.
Thread machine: Use built-in needle threader for easy threading.

WARNING! Machine is heavy; lift with care to avoid injury. Keep fingers away from needle during operation.

First-Time Operation

Power on machine; follow setup procedures.

Select straight stitch: Turn stitch selector to position 1.
Set stitch length: Adjust to 2.5mm for general sewing.
Thread machine: Follow numbered threading guide.
Insert bobbin: Place bobbin in case with thread unwinding counterclockwise.
Test stitch: Use scrap fabric to test stitching.
Adjust tension: If needed, adjust upper thread tension dial.

CAUTION! Always turn off machine when changing needles or presser feet.

Specifications

Stitches: 25 built-in stitches
Buttonhole: One-step auto-size
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable
Bobbin: Top-loading, jam-resistant
Needle Threader: Built-in automatic
Feed Dogs: Drop feed for free-motion work
Presser Feet: 6 included (general purpose, zipper, buttonhole, walking, darning, blind hem)
Power Source: 120V AC, 60Hz
Warranty: 25-year limited warranty

Controls and Settings

Main controls: Stitch selector dial, stitch length dial, stitch width dial, reverse stitch button, power switch, foot controller.

Stitch Selection: Turn dial to select from 25 built-in stitches. Stitch Length: Adjust from 0-4mm (0 for darning, 4 for basting). Stitch Width: Adjust from 0-5mm for zigzag and decorative stitches. Reverse Stitch: Hold button to reinforce stitching. Tension Control: Adjust upper thread tension (4 for normal sewing).

Stitch Selection

25 built-in stitches including:

Straight stitch: Positions 1-3 for different needle positions
Zigzag stitch: Position 4, adjustable width
Blind hem stitch: Position 5
Stretch stitches: Positions 6-8 for knit fabrics
Decorative stitches: Positions 9-15
Quilting stitches: Positions 16-20
Buttonhole stitch: Position 21 (one-step)

Tip: Always test stitches on scrap fabric before starting project.

Quilting Functions

Special features for quilters:

Drop feed: Lower feed dogs for free-motion quilting
Walking foot: Even feeding for multiple layers
Darning foot: For free-motion quilting and stippling
Extension table: Large work surface for quilts
Quilting stitches: Built-in decorative quilting patterns
Even feed: Prevents fabric shifting during quilting

WARNING! Use proper quilting gloves and keep hands clear of needle during free-motion work.

Maintenance & Cleaning

Unplug before cleaning. Regular maintenance ensures optimal performance.

Daily: Brush out lint from bobbin area and feed dogs
Weekly: Oil hook race and moving parts (use sewing machine oil only)
Monthly: Clean tension discs with soft brush
As needed: Replace needle after 8-10 hours of sewing

CAUTION! Use only Janome recommended needles and accessories. Do not use compressed air for cleaning.

Accessories

Included accessories:

General purpose foot
Zipper foot
Buttonhole foot
Walking foot
Darning foot
Blind hem foot
Bobbin (4 extra)
Needles (assorted sizes)
Seam ripper/brush
Screwdriver

Warranty Information

25-year limited warranty covering mechanical parts. 5-year warranty on electrical components. 1-year warranty on labor. Warranty registration required within 10 days of purchase. For service, contact authorized Janome dealer or visit www.janome.com. Keep original receipt for warranty claims.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Rethread machine; check tension; replace needle.
Skip stitches	Bent needle/wrong needle	Replace needle; ensure correct needle type for fabric.
Bobbin thread bunching	Incorrect bobbin insertion	Remove and reinsert bobbin; check threading.
Machine not running	Power/pedal issues	Check power connection; ensure pedal is plugged in.
Uneven stitches	Tension issues	Adjust upper and bobbin tension; clean tension discs.

Service: Contact authorized Janome dealer or 1-800-631-0183; www.janome.com