Janome RE1306 Instruction Manual

The Janome RE1306 is a 6-thread embroidery machine with built-in embroidery designs, USB connectivity, automatic needle threader, large embroidery area, LCD touch screen, speed control slider, built-in memory, and various embroidery functions. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Embroidery unit, LCD touch screen, automatic needle threader, USB port, built-in designs, speed control slider, thread cutter.

Installation and Setup

Unpack and inspect contents. Place on stable surface.

1. Attach embroidery unit: Align and lock into position on main machine.
2. Install needle: Loosen needle clamp screw, insert needle with flat side to back.
3. Connect power: Plug power cord into machine and wall outlet.
4. Install bobbin: Follow threading diagram for proper bobbin installation.
5. Thread upper thread: Use automatic needle threader for easy threading.

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing accessories.

First-Time Operation

Power on machine; follow on-screen prompts.

1. Select embroidery design: Use touch screen to browse built-in designs.
2. Prepare fabric: Hoop fabric with stabilizer in embroidery hoop.
3. Attach hoop: Place hooped fabric onto embroidery unit.
4. Thread machine: Follow threading path indicated on machine.
5. Start embroidery: Press start button and monitor first few stitches.
6. Adjust settings: Use speed control and editing functions as needed.

CAUTION! Always use appropriate stabilizer for fabric type. Test embroidery on scrap fabric first.

Specifications

• Machine Type: 6-thread embroidery machine
• Built-in Designs: 130+ embroidery patterns
• Embroidery Area: 140mm x 200mm
• Maximum Speed: 860 stitches per minute
• Display: 3.7-inch color LCD touch screen
• Connectivity: USB port for design import
• Memory: Built-in storage for custom designs
• Needle System: HAx1 SP
• Power Requirements: 120V AC, 60Hz
• Dimensions: Standard embroidery machine size

Controls and Functions

Access functions via LCD touch screen and control buttons. Front Panel: Power switch, speed control slider, thread cutter, needle up/down.

Touch Screen: Design selection, editing functions, settings menu, stitch adjustment, mirroring, rotating, resizing.

Embroidery Functions: Design editing (resize, rotate, mirror), lettering, monogramming, combining designs, color sorting, jump stitch trimming. Settings: Needle position, thread tension, bobbin warning, language selection, measurement units.

Threading and Bobbin

Upper Threading: Follow numbered path from spool to needle. Use automatic needle threader.

1. Place thread spool on spool pin.
2. Follow threading path through tension discs.
3. Use automatic needle threader for final threading.
4. Pull thread under presser foot toward back.

Bobbin Winding:

1. Place empty bobbin on winder shaft.
2. Thread through bobbin winding tension.
3. Press foot control to wind bobbin.
4. Stop when bobbin is 80% full.

Tip: Always use Janome recommended bobbins and threads for optimal performance.

Embroidery Operation

Supports built-in designs and imported designs via USB.

1. Select design: Browse built-in library or import via USB.
2. Edit design: Resize, rotate, mirror, or combine with other designs.
3. Hoop fabric: Use appropriate hoop size with stabilizer.
4. Position hoop: Attach to embroidery unit and secure.
5. Start embroidery: Monitor first few stitches for proper alignment.
6. Color changes: Machine will stop automatically for color changes.
7. Finishing: Remove hoop and trim jump stitches carefully.

WARNING! Never leave machine unattended during operation. Keep hands away from moving parts.

USB Connectivity

Import custom embroidery designs via USB port. Supported formats: JEF, SEW, PES, DST, EXP.

1. Format USB drive to FAT32.
2. Copy design files to root directory.
3. Insert USB drive into machine port.
4. Select USB mode on touch screen.
5. Browse and select design files.
6. Edit and embroider as with built-in designs.

Maintenance & Cleaning

Unplug before cleaning. Regular maintenance ensures optimal performance.

1. Clean lint buildup: Use brush to remove lint from bobbin area and feed dogs.
2. Oil moving parts: Use sewing machine oil on designated points (refer to manual).
3. Clean exterior: Use soft, dry cloth only.
4. Needle replacement: Replace needle after every project or 8 hours of use.

CAUTION! Do not use compressed air for cleaning. Never spray liquids directly on machine.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2025 Janome; trademarks of Janome America, Inc. For support, visit www.janome.com or contact 1-800-631-0183. Made for household use only.

Troubleshooting

Reset: Turn machine off and on to reset electronic functions.

Service: 1-800-631-0183; www.janome.com