Janome RE1306 Manual

The Janome RE1306 is a computerized embroidery machine with 4" x 4" embroidery field, 130 built-in embroidery designs, USB port for importing designs, automatic needle threader, built-in thread cutter, LCD touch screen display, embroidery speed control, and various editing functions. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: LCD touch screen, automatic needle threader, built-in thread cutter, USB port, embroidery hoop, bobbin winding system.

Feature	Description
Embroidery Field	4" x 4" maximum embroidery area
Built-in Designs	130 embroidery designs including alphabets
USB Port	For importing custom embroidery designs
LCD Touch Screen	3.2" color display for design selection and editing
Automatic Needle Threader	Easy threading with push-button operation
Built-in Thread Cutter	Automatic thread cutting after embroidery
Speed Control	Adjustable embroidery speed up to 860 spm
Memory Function	Saves frequently used designs and settings
Mirror Imaging	Horizontal and vertical design flipping
Design Editing	Resize, rotate, and combine designs

Installation and Setup

Unpack and inspect all components. Place on stable, flat surface.

1. Remove protective packaging and foam pieces
2. Install embroidery foot and needle
3. Connect power cord to machine and wall outlet
4. Wind bobbin and thread machine
5. Install embroidery hoop

WARNING! Machine is heavy; lift with care. Ensure stable surface to prevent tipping.

First-Time Operation

Power on machine; follow on-screen setup prompts.

1. Select language: Choose from available options in settings menu
2. Thread machine: Use automatic needle threader for upper thread
3. Load bobbin: Insert bobbin with thread pulling clockwise
4. Test embroidery: Run built-in test design to verify operation
5. Calibrate: Follow on-screen calibration instructions if prompted

CAUTION! Keep fingers away from moving needle during operation.

Specifications

• Embroidery Field: 4" x 4" (100mm x 100mm)
• Built-in Designs: 130 embroidery designs
• Stitches Per Minute: Up to 860 spm
• Needle: HAx1 SP 75/11 embroidery needle
• Display: 3.2" color LCD touch screen
• Connectivity: USB port for design import
• Memory: Internal memory for design storage
• Power Requirements: 120V AC, 60Hz
• Dimensions: Standard embroidery machine size

Controls and Functions

Access functions via LCD touch screen and physical buttons.

Physical Controls: Power switch, start/stop button, needle up/down, thread cutter, speed control slider.

Touch Screen Functions: Design selection, editing tools (resize, rotate, mirror), color selection, stitch settings, memory management. Editing: Design combine, lettering, frame pattern, monogram functions. Settings: Thread tension adjustment, calibration, language selection, system preferences.

Connecting Accessories

USB devices: Connect USB stick for design transfer. Additional hoops: Compatible with Janome accessory hoops.

1. Turn off machine before connecting accessories
2. Insert USB device into designated port
3. Install additional hoops following manufacturer instructions
4. Connect optional foot pedal if available

Tip: Use only Janome-approved accessories for optimal performance.

Embroidery Operation

Supports built-in designs and imported custom designs.

1. Select design: Choose from built-in library or USB import
2. Hoop fabric: Secure fabric in embroidery hoop
3. Position hoop: Attach to machine and lower presser foot
4. Start embroidery: Press start button or use foot pedal
5. Monitor progress: Watch design creation on LCD screen
6. Color changes: Machine will stop for thread color changes
7. Complete design: Machine will stop and cut threads automatically
8. Remove hoop: Carefully remove completed embroidery

WARNING! Never leave machine unattended during operation.

Advanced Features

Design Editing: Resize designs 50-120%, rotate designs, mirror imaging, design combine function. Lettering: Built-in fonts for monogramming and text. Memory: Save custom designs and combinations for future use.

Care & Maintenance

Unplug before cleaning. Regular oiling as per manual instructions. Clean lint and dust from bobbin area frequently.

CAUTION! Use only Janome-approved lubricants. Do not use compressed air for cleaning.

Regulatory Information

FCC Part 15: Class B digital device compliant. UL listed for safety. Copyright © 2025 Janome; all rights reserved. For technical support, visit www.janome.com or contact 1-800-631-0183.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord connection; ensure power switch is on.
Thread breaking	Tension/needle issues	Check thread tension; replace needle; ensure proper threading.
Design misalignment	Hooping/calibration	Re-hoop fabric securely; run calibration routine.
USB not recognized	Format/compatibility	Use FAT32 formatted USB; check file format compatibility.
Needle hitting hoop	Positioning	Ensure hoop is properly seated; check design positioning.

Reset: System menu > Factory Reset if available.

Service: 1-800-631-0183; www.janome.com