Janome RE1306 Sewing Machine Manual

The Janome RE1306 is a versatile computerized embroidery sewing machine with 130 built-in embroidery designs, 6 lettering fonts, USB connectivity, automatic needle threader, built-in thread cutter, large embroidery area, LCD touch screen display, automatic tension control, and speed control slider. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: LCD touch screen, embroidery unit, automatic needle threader, built-in thread cutter, USB port, bobbin winding system, presser foot lever, stitch selection dial.

Installation & Setup

Unpack and inspect all components. Place on stable, level surface.

1. Remove packing materials: Remove all protective covers and tapes.
2. Attach embroidery unit: Align and click into position on machine bed.
3. Install needle: Loosen needle clamp screw, insert needle with flat side to back.
4. Connect power: Plug power cord into machine and wall outlet.
5. Wind bobbin: Follow bobbin winding instructions in manual.

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing accessories.

First-Time Operation

Power on machine; follow initial setup procedure.

1. Thread upper thread: Follow numbered threading path on machine.
2. Use automatic needle threader: Push lever down to thread needle automatically.
3. Insert bobbin: Place bobbin in case with thread unwinding counterclockwise.
4. Select embroidery design: Use LCD screen to browse and select designs.
5. Test stitch: Run test embroidery on scrap fabric first.

CAUTION! Always use proper needle for fabric type. Replace bent or dull needles immediately.

Specifications

• Machine Type: Computerized embroidery sewing machine
• Built-in Designs: 130 embroidery designs
• Lettering Fonts: 6 built-in fonts
• Embroidery Area: 5" x 7" (130mm x 180mm)
• Stitches per Minute: 100-800 spm adjustable
• Needle Positions: Multiple positions for embroidery
• Display: LCD touch screen with graphic interface
• Connectivity: USB port for design import
• Power Requirements: 110-120V, 60Hz
• Dimensions: Standard sewing machine size with embroidery unit

Controls and Functions

Access functions via LCD touch screen and control buttons. Front Panel: Power switch, speed control slider, thread cutter button, needle up/down button.

LCD Functions: Design selection, editing, resizing, rotating, mirroring, lettering, memory functions, settings adjustment.

Embroidery: Design library, editing tools, positioning, color sequence. Sewing: Stitch selection, length adjustment, width adjustment, tension control. Utility: Language selection, sound settings, calibration, factory reset.

Embroidery Operation

Complete embroidery workflow from design to finished piece.

1. Hoop fabric: Secure fabric in embroidery hoop without wrinkles.
2. Attach hoop: Place hoop on embroidery unit and lock in position.
3. Select design: Browse designs on LCD screen and select desired pattern.
4. Edit design: Resize, rotate, or mirror as needed using touch screen.
5. Thread colors: Follow on-screen color sequence for multi-color designs.
6. Start embroidery: Press start button and monitor progress.
7. Color changes: Machine will stop automatically for color changes.
8. Remove hoop: Carefully remove finished embroidery from hoop.

Tip: Always use stabilizer appropriate for your fabric type for best results.

Basic Sewing Functions

Standard sewing operations and utility stitches.

1. Select sewing mode: Switch from embroidery to sewing mode.
2. Choose stitch: Select from built-in utility stitches.
3. Adjust settings: Set stitch length and width as needed.
4. Position fabric: Guide fabric under presser foot.
5. Start sewing: Use foot control or start/stop button.
6. Reverse stitching: Use reverse button for securing stitches.
7. Thread cutting: Use built-in thread cutter when finished.

WARNING! Never pull or push fabric through machine - let feed dogs move fabric.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

1. Daily cleaning: Remove lint and dust from bobbin area and feed dogs.
2. Monthly oiling: Apply sewing machine oil to designated points (if required).
3. Needle replacement: Change needle after every project or 8 hours of use.
4. Cover storage: Keep machine covered when not in use.
5. Professional service: Annual servicing recommended for heavy use.

CAUTION! Unplug machine before performing any maintenance or cleaning.

Accessories Included

Warranty Information

Janome RE1306 comes with limited warranty covering manufacturing defects. Warranty period: 25 years for mechanical parts, 2 years for electronic components, 1 year for labor. Registration required within 30 days of purchase. Warranty does not cover damage from misuse, improper maintenance, or unauthorized repairs. For warranty service, contact authorized Janome dealer with proof of purchase.

Troubleshooting

Reset: Menu > Settings > Factory Reset if experiencing persistent issues.

Service: Contact authorized Janome service center at 1-800-631-0183 or visit www.janome.com