Janome RE1706 Manual

The Janome RE1706 is a professional-grade embroidery machine with 170x170mm embroidery area, built-in designs, USB connectivity, automatic thread trimming, LCD touch screen, built-in memory, and multiple embroidery functions. Features include automatic needle threading, speed control, mirror imaging, and various editing capabilities. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: LCD touch screen, embroidery unit, automatic thread cutter, USB port, built-in memory, bobbin winding system, and various embroidery functions.

Feature	Description
Embroidery Area	170mm x 170mm maximum embroidery field
Built-in Designs	Multiple pre-loaded embroidery patterns
USB Connectivity	For importing custom designs
LCD Touch Screen	Color display for design selection and editing
Automatic Thread Trimmer	Cuts top and bobbin threads automatically
Speed Control	Adjustable embroidery speed up to 850 SPM
Built-in Memory	Stores frequently used designs
Mirror Imaging	Horizontal and vertical flip functions
Auto Needle Threader	Easy needle threading system
Bobbin Warning	Alerts when bobbin thread is low

Installation and Setup

Unpack and inspect all components. Place on stable, level surface.

1. Attach embroidery unit: Align with machine body and slide into position until it clicks.
2. Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten screw.
3. Thread machine: Follow threading path indicated on machine; use automatic needle threader.
4. Wind bobbin: Place bobbin on winder, thread through tension disc, press foot control.
5. Insert bobbin: Place bobbin in case with thread counterclockwise, pull thread through slot.
6. Connect power: Plug into appropriate power outlet.

WARNING! Machine is heavy; use proper lifting technique. Ensure stable surface to prevent tipping.

First-Time Operation

Power on machine; familiarize yourself with basic functions.

1. Select design: Use touch screen to browse built-in designs or USB designs.
2. Hoop fabric: Use appropriate hoop size; ensure fabric is taut and stabilized.
3. Position hoop: Attach to embroidery unit, ensuring secure connection.
4. Thread machine: Use recommended thread types and weights.
5. Test stitch: Run design on test fabric to check tension and positioning.
6. Adjust settings: Modify speed, tension, and design size as needed.

CAUTION! Always use proper stabilizer for embroidery projects. Keep fingers away from moving needle.

Specifications

• Embroidery Area: 170mm x 170mm
• Maximum Speed: 850 stitches per minute
• Needle: Standard embroidery needles 75/11 - 90/14
• Stitch Length: Adjustable 0.1-5.0mm
• Thread: Standard embroidery thread 40wt recommended
• Display: Color LCD touch screen
• Connectivity: USB port for design transfer
• Memory: Built-in storage for designs
• Power Requirements: Standard household outlet
• Dimensions: Standard embroidery machine size

Controls and Functions

Access functions via LCD touch screen and physical controls. Front Panel: Power switch, thread cutter button, start/stop button, speed control slider.

Touch Screen Functions: Design selection, editing tools, mirror imaging, rotation, resizing, lettering, and file management.

Basic Operations: Needle up/down, thread trimming, bobbin winding, tension adjustment. Editing: Combine designs, change colors, adjust density, preview stitching order.

Embroidery Operations

Complete embroidery process from design selection to finished project.

1. Design Selection: Choose from built-in library or USB designs.
2. Hoop Preparation: Select appropriate hoop size; stabilize fabric properly.
3. Threading: Use quality embroidery thread; check tension.
4. Positioning: Use laser pointer or grid to position design accurately.
5. Stitching: Start embroidery; monitor progress on screen.
6. Color Changes: Machine stops automatically for color changes.
7. Finishing: Trim jump stitches; remove from hoop carefully.

Tip: Always test new designs on scrap fabric first. Use appropriate stabilizer for fabric type.

Design Editing

Advanced editing capabilities for customizing embroidery designs.

1. Resize: Adjust design size within embroidery area limits.
2. Rotate: Change design orientation in 1-degree increments.
3. Mirror: Create horizontal or vertical mirror images.
4. Combine: Merge multiple designs into one project.
5. Lettering: Add text using built-in fonts and monogram functions.
6. Color Editing: Change thread colors and viewing order.
7. Save/Load: Store edited designs in machine memory or USB.

WARNING! Do not exceed maximum embroidery area. Over-sizing may cause design distortion.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Daily: Clean lint from bobbin area and feed dogs.
2. Weekly: Oil moving parts as specified in manual.
3. Monthly: Check needle plate for burrs; replace if damaged.
4. As Needed: Clean exterior with soft, dry cloth.
5. Storage: Cover machine when not in use; store in dry area.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended lubricants.

Accessories

Standard accessories included with Janome RE1706.

Accessory	Purpose
Embroidery Hoops	Various sizes for different projects
Bobbin Case	Standard bobbin housing
Needles	Assorted embroidery needles
Thread Spool Caps	Prevent thread tangling
Screwdrivers	For needle plate and bobbin case
Cleaning Brush	Lint removal tool
USB Cable	Design transfer connectivity
Power Cord	Standard power connection

Regulatory Information

CE Certified: Complies with European safety standards. UL Listed: Meets North American electrical safety requirements. Copyright © 2025 Janome; all rights reserved. For technical support and warranty information, contact authorized Janome dealers or visit www.janome.com. Serial number located on machine base.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect tension/thread path	Rethread machine; adjust tension; check for burrs on needle plate.
Design misalignment	Poor hooping/fabric shift	Re-hoop fabric taut; use proper stabilizer; check hoop attachment.
Machine not starting	Power/safety issues	Check power connection; ensure embroidery unit is properly attached.
Poor stitch quality	Tension/needle issues	Replace needle; adjust tension; check bobbin threading.
USB not recognized	Format/compatibility	Use FAT32 formatted USB; check file format compatibility.
Bobbin thread showing	Top tension too loose	Increase top tension; ensure proper bobbin installation.

Reset: Turn machine off and on to reset electronic functions.

Service: Contact authorized Janome service center for repairs. Warranty: 25-year limited warranty on mechanical parts.