janome sewing machine 2160dc manual

The Janome 2160DC is a versatile computerized sewing machine featuring 60 built-in stitches, one-step buttonhole, automatic needle threader, drop feed for free-motion sewing, built-in thread cutter, and easy stitch selection dial. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Functions 6. Stitch Selection 7. Basic Sewing Operations 8. Maintenance & Cleaning 9. Accessories 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Computerized stitch selection, automatic needle threader, drop feed mechanism, built-in thread cutter, LED work light, reverse stitch button.

Feature	Description
Built-in stitches	60 utility, decorative, and stretch stitches
One-step buttonhole	Automatic buttonhole sizing
Automatic needle threader	Easy threading with push-pull mechanism
Drop feed	Free-motion sewing capability
Built-in thread cutter	Convenient thread cutting at front of machine
Stitch selection dial	Easy stitch pattern selection
Reverse stitch button	Reinforce stitching at beginning/end
LED work light	Bright illumination of sewing area
Presser foot pressure	Adjustable for different fabric types
Free arm	For sewing cuffs and sleeves

Installation & Setup

Unpack and inspect contents. Place on stable surface.

Remove packaging materials and protective covers.
Place machine on sturdy table or sewing cabinet.
Connect foot control pedal to machine.
Plug power cord into electrical outlet.
Install needle following directional guide.
Wind bobbin and thread machine according to threading diagram.

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing needle.

First-Time Operation

Power on machine; follow initial setup procedures.

Turn power switch to ON position.
Select straight stitch using stitch selection dial.
Practice stitching on scrap fabric.
Adjust stitch length and width as needed.
Test reverse stitching function.
Practice with different built-in stitches.

CAUTION! Always use proper needle for fabric type. Ensure machine is properly threaded before sewing.

Specifications

Stitches: 60 built-in stitches including utility, decorative, and stretch
Buttonhole: One-step automatic buttonhole
Stitch Width: Up to 7mm
Stitch Length: Up to 5mm
Needle Positions: Multiple needle positions available
Bobbin: Front loading, Class 15 transparent bobbin
Presser Feet: Multiple feet included for different applications
Power Source: 120V AC, 60Hz
Dimensions: Standard sewing machine size with free arm
Weight: Approximately 15 lbs

Controls and Functions

Access functions via control panel and dials. Front Panel: Power switch, stitch selection dial, stitch width/length controls.

Main Controls: Power switch, stitch selection dial, reverse stitch button, stitch width adjustment, stitch length adjustment, thread tension dial.

Stitch Selection: Turn dial to select from 60 built-in patterns. Stitch Adjustment: Modify width (0-7mm) and length (0-5mm). Tension: Adjust thread tension dial for balanced stitches. Special Functions: Drop feed lever for free-motion sewing, built-in thread cutter.

Stitch Selection

60 built-in stitches including straight, zigzag, stretch, and decorative patterns.

Turn machine power ON.
Rotate stitch selection dial to desired stitch number.
Refer to stitch chart for pattern identification.
Adjust stitch width and length as needed.
Test stitch on scrap fabric before sewing project.

Tip: Use appropriate presser foot for selected stitch type.

Basic Sewing Operations

Step-by-step guide for fundamental sewing tasks.

Thread machine following numbered guide.
Wind and insert bobbin correctly.
Select appropriate stitch for fabric type.
Place fabric under presser foot, lower foot lever.
Press foot control to begin sewing.
Use reverse stitch to secure beginning and end.
Raise presser foot and remove fabric when finished.
Use built-in thread cutter to trim threads.

WARNING! Never pull fabric while sewing - let feed dogs move fabric automatically.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Unplug machine before cleaning or maintenance.
Clean lint from bobbin area after each project.
Oil machine according to lubrication points diagram.
Wipe exterior with soft, dry cloth.
Replace needle regularly (every 8-10 hours of sewing).
Check and clean feed dogs periodically.

CAUTION! Use only Janome recommended oil. Do not use compressed air for cleaning.

Accessories

Standard accessories included with Janome 2160DC.

Accessory	Purpose
All-purpose foot	General sewing
Zipper foot	Installing zippers
Buttonhole foot	Automatic buttonholes
Blind hem foot	Invisible hemming
Overedge foot	Preventing fabric fraying
Bobbin (4)	Extra bobbins for thread colors
Needles	Assorted sizes for different fabrics
Seam ripper	Removing stitches
Brush	Cleaning lint
Screwdriver	Needle plate removal

Regulatory Information

UL Listed: Complies with safety standards for household sewing machines. Copyright © Janome America, Inc. For technical support, contact authorized Janome service centers. Warranty: Limited warranty covering manufacturing defects. For support, visit www.janome.com or contact 1-800-631-0183.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Needle breaks	Incorrect insertion/bent needle	Ensure flat side faces back; replace bent needle.
Thread bunching	Improper threading/tension	Re-thread completely; check bobbin insertion.
Skipped stitches	Wrong needle type/damaged needle	Use correct needle for fabric; replace needle.
Machine won't run	Power connection/foot control	Check power cord; ensure foot control is plugged in.
Uneven stitches	Tension issues/thread quality	Adjust thread tension; use quality thread.

Reset: Turn power off and on to reset computerized functions.

Service: 1-800-631-0183; www.janome.com