janome sewing machine manual 1008

The Janome Sewing Machine Model 1008 is a reliable mechanical sewing machine designed for home use, featuring 8 built-in stitches, 4-step buttonhole function, free arm capability, built-in thread cutter, drop feed for free-motion sewing, stitch length and width adjustment, reverse sewing lever, and built-in light. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Mechanical sewing machine with 8 built-in stitches, free arm, built-in thread cutter, drop feed mechanism, stitch length and width controls.

Installation & Setup

Unpack and inspect contents. Place on stable sewing table.

1. Remove machine from packaging: Carefully lift machine from box, remove all protective materials.
2. Attach power cord: Plug power cord into machine and electrical outlet.
3. Install foot controller: Connect foot controller to machine port.
4. Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten screw.
5. Wind bobbin: Follow bobbin winding instructions in manual.
6. Thread machine: Follow threading diagram on machine.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure stable surface before operation.

First-Time Operation

Power on machine; test basic functions.

1. Select straight stitch: Turn stitch selector to straight stitch position.
2. Set stitch length: Adjust to medium setting (2.5-3.0).
3. Practice sewing: Use scrap fabric to test machine operation.
4. Test reverse: Press reverse lever to ensure proper function.
5. Check tension: Sew test seam and adjust tension if needed.
6. Practice buttonhole: Follow 4-step buttonhole instructions.

CAUTION! Keep fingers away from moving needle. Always turn off when threading or changing needle.

Specifications

• Model: Janome 1008
• Stitches: 8 built-in stitches
• Buttonhole: 4-step manual buttonhole
• Stitch Length: 0-4mm adjustable
• Stitch Width: Up to 5mm adjustable
• Presser Feet: Standard snap-on feet included
• Free Arm: Yes, removable extension table
• Bobbin: Front-loading, Class 15 transparent bobbin
• Needle System: HAx1 standard domestic needles
• Power Source: Standard household electrical outlet
• Machine Weight: Approximately 6.8 kg (15 lbs)

Controls and Settings

Main controls located on front and side of machine body.

Front Panel: Stitch selector dial, stitch length control, stitch width control, reverse sewing lever, bobbin winder, power/light switch.

Stitch Selection: Turn dial to select desired stitch pattern. Stitch Length: Adjust for shorter or longer stitches (0-4mm). Stitch Width: Adjust zigzag and decorative stitch width (0-5mm). Reverse: Hold lever for reverse stitching. Tension: Adjust upper thread tension dial (0-9 settings).

Stitch Selection

8 built-in stitches for various sewing applications.

1. Straight Stitch: Basic sewing, topstitching, basting
2. Zigzag Stitch: Finishing edges, appliqué, stretch fabrics
3. Blind Hem Stitch: Nearly invisible hems
4. Stretch Stitch: Strong seam for knit fabrics
5. Decorative Stitches: Various patterns for embellishment
6. Buttonhole Stitch: 4-step manual buttonhole creation
7. Satin Stitch: Close zigzag for decorative effects
8. Overcast Stitch: Prevents fabric fraying

Tip: Always test stitch on scrap fabric before sewing project.

Basic Sewing Techniques

Fundamental sewing operations for beginners.

1. Threading: Follow numbered threading path on machine.
2. Bobbin Installation: Insert bobbin with thread rotating clockwise.
3. Starting to Sew: Lower presser foot, gently press foot controller.
4. Straight Seams: Guide fabric evenly under presser foot.
5. Turning Corners: Stop with needle in fabric, lift presser foot, pivot fabric.
6. Finishing Seams: Reverse stitch at beginning and end.
7. Buttonholes: Follow 4-step sequence marked on machine.
8. Zipper Installation: Use zipper foot for professional results.

WARNING! Never pull fabric while sewing; let feed dogs move fabric.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Brush out lint from bobbin area and feed dogs.
2. Weekly: Oil machine according to lubrication points in manual.
3. Monthly: Clean race hook and surrounding mechanism.
4. Needle Replacement: Change needle after 8-10 hours of sewing.
5. Professional Service: Annual servicing recommended for heavy use.

CAUTION! Unplug machine before cleaning or maintenance.

Accessories

Standard accessories included with Janome 1008.

Safety Information

Important safety precautions for machine operation.

• Always unplug machine when not in use
• Keep fingers away from moving needle
• Do not sew over pins
• Use proper needle for fabric type
• Ensure adequate lighting in sewing area
• Keep machine clean and free of lint
• Store in dry location away from moisture
• Supervise children when machine is in use

Troubleshooting

Service: Contact authorized Janome service center for repairs.

Support: Visit www.janome.com or contact customer service for assistance.