The Janome Sewing Machine Model 802 is a versatile mechanical sewing machine designed for home use, featuring 8 built-in stitches, 4-step buttonhole, drop feed for free-motion sewing, built-in thread cutter, stitch length and width adjustment, reverse sewing function, and easy threading system. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.
Key components: 8 built-in stitches, 4-step buttonhole, drop feed mechanism, built-in thread cutter, stitch length/width adjustment, reverse sewing function.
| Feature | Description |
|---|---|
| Built-in stitches | 8 essential stitches including straight, zigzag, and decorative |
| 4-step buttonhole | Easy buttonhole creation in 4 simple steps |
| Drop feed | Lower feed dogs for free-motion sewing and darning |
| Built-in thread cutter | Convenient thread cutting on machine face |
| Stitch length adjustment | Adjustable from 0-4mm |
| Stitch width adjustment | Adjustable up to 5mm |
| Reverse sewing lever | Reinforce stitches at beginning and end of seams |
| Easy threading system | Numbered threading path for quick setup |
| Free arm | Convertible for sewing cuffs and sleeves |
| Built-in light | LED illumination for better visibility |
Unpack and inspect contents. Place on stable surface at comfortable working height.
WARNING! Keep fingers away from moving parts. Always turn off machine when threading or changing needle.
Power on machine; follow basic setup procedures.
CAUTION! Always start with needle in highest position. Keep work area well-lit.
Main controls: Stitch selector, stitch length dial, stitch width dial, reverse lever, bobbin winder, handwheel.
Stitch Selection: Turn dial to select from 8 stitches. Stitch Length: 0-4mm (0 for darning). Stitch Width: 0-5mm for zigzag and decorative stitches. Reverse Lever: Hold down for backward stitching. Tension Dial: Adjust thread tension (4 is normal). Bobbin Winder: Wind bobbin without threading needle.
8 built-in stitches for various sewing applications.
Tip: Always test stitch on scrap fabric before sewing project.
Regular maintenance ensures optimal performance and longevity.
WARNING! Always unplug machine before cleaning or maintenance.
Standard accessories included with Janome 802:
| Accessory | Purpose |
|---|---|
| General Purpose Foot | Standard sewing |
| Zigzag Foot | Zigzag and decorative stitches |
| Buttonhole Foot | Creating buttonholes |
| Darning Plate | Free-motion sewing |
| Assorted Needles | Different sizes for various fabrics |
| Bobbin (Class 15) | Extra bobbin |
| Seam Ripper | Removing stitches |
| Brush | Cleaning lint |
| Screwdriver | Needle plate removal |
Important safety precautions for safe operation.
CAUTION! Needle moves very fast and can cause serious injury.
Janome 802 comes with limited warranty covering defects in materials and workmanship.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Thread breaking | Incorrect threading/tension | Rethread machine; adjust tension; check for burrs on needle |
| Needle breaking | Bent needle/wrong size | Replace needle; ensure correct size for fabric |
| Uneven stitches | Tension issues | Adjust upper and bobbin tension; rethread |
| Machine jams | Thread buildup | Remove needle plate; clean bobbin area; rethread |
| Fabric not feeding | Feed dogs lowered | Raise feed dogs; check stitch length setting |
| Skip stitches | Dull needle/wrong type | Replace needle; use correct needle for fabric type |
| No power | Power connection | Check power cord; ensure foot control plugged in |
Service: 1-800-631-0183; www.janome.com