Janome Sewing Machine New Home Manual

The Janome New Home sewing machine is a versatile household sewing machine featuring multiple stitch patterns, automatic needle threading, built-in buttonholer, adjustable stitch length and width, free arm capability, drop feed for darning and quilting, built-in LED light, easy bobbin winding system, and various presser feet for different sewing applications. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main body with free arm, Stitch selection dial, Stitch length control, Stitch width control, Reverse stitch button, Bobbin winder, Thread tension dial, Presser foot lifter, Built-in LED light.

Installation & Setup

Unpack and inspect all components. Place on stable, level surface.

1. Remove machine from packaging: Lift carefully from carrying case.
2. Install foot control: Plug into machine's foot control port.
3. Connect power: Plug power cord into machine and wall outlet.
4. Attach accessories: Install standard presser foot and needle.
5. Thread machine: Follow threading guide printed on machine.

WARNING! Keep fingers away from needle area during setup and operation. Always unplug when not in use.

First-Time Operation

Prepare machine for first use with proper threading and bobbin winding.

1. Wind bobbin: Place thread on spool pin, guide through bobbin winder tension.
2. Insert bobbin: Place bobbin in case with thread pulling counterclockwise.
3. Thread upper needle: Use automatic needle threader or follow threading path.
4. Select stitch: Turn stitch selection dial to desired pattern.
5. Test sew: Use scrap fabric to test stitch quality and tension.

CAUTION! Always start with needle in highest position. Keep work area clean and organized.

Specifications

• Machine Type: Electronic household sewing machine
• Stitch Patterns: 15 built-in stitches including utility and decorative
• Stitch Length: Adjustable 0-4mm
• Stitch Width: Adjustable up to 5mm
• Buttonholes: One-step automatic
• Needle System: HAx1 standard domestic needles
• Bobbin: Class 15 transparent bobbin
• Presser Feet: Multiple included: zipper, buttonhole, blind hem
• Power Requirements: 120V AC, 60Hz
• Weight: Approximately 12 lbs

Controls and Settings

Main controls located on front and top of machine body.

Front Panel: Stitch selection dial, Stitch length control, Stitch width control, Reverse stitch button.

Top Controls: Handwheel, Bobbin winder, Thread tension dial, Presser foot lifter.

Stitch Selection: Turn dial to select from straight, zigzag, stretch, and decorative stitches. Tension Control: Adjust for different fabric types (normal setting 4-5). Feed Dogs: Lower for free-motion work. Presser Foot Pressure: Spring-loaded for even fabric feeding.

Stitch Selection Guide

Choose appropriate stitches for different sewing applications.

1. Straight Stitch: Basic sewing, seams (length 2.0-2.5mm)
2. Zigzag Stitch: Finishing edges, appliqué (width 2-4mm)
3. Stretch Stitch: Knits and stretch fabrics
4. Blind Hem: Nearly invisible hemming
5. Decorative Stitches: Embellishment and topstitching
6. Buttonhole: Automatic one-step buttonholes

Tip: Always test stitch on scrap fabric of same type before sewing project.

Basic Sewing Techniques

Fundamental sewing operations for beginners.

1. Starting to sew: Place fabric under presser foot, lower foot, depress pedal slowly.
2. Seam sewing: Guide fabric gently, don't push or pull.
3. Reverse stitching: Press reverse button at beginning and end of seams.
4. Turning corners: Stop with needle down, lift presser foot, pivot fabric.
5. Finishing seams: Use zigzag or overcast stitch to prevent fraying.
6. Buttonholes: Mark position, use automatic buttonhole foot.
7. Zipper insertion: Use zipper foot for invisible and regular zippers.

WARNING! Never sew over pins. Remove pins before they reach presser foot.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Daily: Brush out lint from bobbin area and feed dogs.
2. Weekly: Oil hook race and moving parts (use sewing machine oil only).
3. Monthly: Clean tension discs with soft brush.
4. As needed: Replace needle after 8-10 hours of sewing.

CAUTION! Always unplug machine before cleaning or maintenance. Use only recommended oils.

Accessory Guide

Standard accessories included with machine.

Safety Information

Important safety precautions for sewing machine operation.

• Always disconnect power when changing needles, cleaning, or not in use
• Keep fingers away from moving parts and needle area
• Do not use damaged or bent needles
• Ensure proper lighting in work area
• Keep machine stable on flat surface during operation
• Store foot control safely when not in use
• Keep machine away from children and pets

Troubleshooting

Service: For technical support, contact Janome customer service at 1-800-631-0183 or visit www.janome.com