Janome Sewist 509 Manual

The Janome Sewist 509 is a compact and versatile sewing machine designed for beginners and intermediate sewers. It features 9 built-in stitches, easy stitch selection, automatic needle threader, built-in thread cutter, free arm capability, and multiple presser feet options. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main body with stitch selection dial, automatic needle threader, built-in thread cutter, free arm, accessory compartment, and power cord.

Feature	Description
Stitch selection dial	For selecting 9 built-in stitches
Automatic needle threader	Easy threading with push-pull mechanism
Built-in thread cutter	Convenient thread cutting on machine
Free arm capability	For sewing cuffs and tubular items
Power cord connector	For power connection
Accessory compartment	Storage for presser feet and accessories
Stitch length dial	Adjusts stitch length (0-4mm)
Reverse stitch button	For reinforcing stitches
Power switch	Turns machine on/off
Bobbin winder	For winding bobbin thread

Unpacking and Setup

Unpack and inspect contents. Place on stable surface.

1. Remove machine from packaging: Carefully lift machine from box.
2. Attach power cord: Connect to machine and wall outlet.
3. Install foot controller: Plug into machine port.
4. Set up accessories: Place in accessory compartment.
5. Position machine: Ensure stable, level surface.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure all connections are secure.

First-Time Operation

Power on machine; follow setup steps.

1. Thread machine: Follow threading path diagrams.
2. Wind bobbin: Use bobbin winder with thread.
3. Insert bobbin: Place in bobbin case following arrows.
4. Select stitch: Turn dial to desired stitch.
5. Test sew: Use scrap fabric to test settings.

CAUTION! Keep fingers away from needle area during operation.

Specifications

• Stitches: 9 built-in stitches including straight, zigzag, and decorative.
• Stitch Length: Adjustable 0-4mm.
• Stitch Width: Up to 5mm for zigzag stitches.
• Speed Control: Foot controller with variable speed.
• Needle System: HAx1 standard needles.
• Bobbin: Front loading, class 15 transparent.
• Presser Feet: Multiple feet included (zigzag, zipper, buttonhole).
• Power Source: 110-120V AC, 60Hz.
• Dimensions: Compact design for easy storage.

Controls and Functions

Access functions via dials and buttons. Front Panel: Stitch selection dial, stitch length dial, reverse button, power switch.

Additional Features: Automatic needle threader, built-in thread cutter, free arm conversion, drop feed for darning.

Stitch Selection: Turn dial to select from 9 stitches. Stitch Length: Adjust from 0-4mm. Reverse: Hold button for reinforcement. Bobbin Winding: Follow marked path for proper winding.

Stitch Selection

9 built-in stitches for various sewing needs.

1. Straight Stitch: For basic sewing and seams.
2. Zigzag Stitch: For finishing edges and decorative work.
3. Blind Hem Stitch: For invisible hems.
4. Stretch Stitch: For knit fabrics.
5. Decorative Stitches: For embellishment.
6. Buttonhole Stitch: One-step automatic buttonholes.

Tip: Always test stitch on scrap fabric first.

Threading and Bobbin

Proper threading ensures smooth operation.

1. Raise needle: Turn handwheel to highest position.
2. Follow threading path: Use numbered guides.
3. Use needle threader: Push down and pull thread through.
4. Wind bobbin: Place thread on spool pin, follow winding path.
5. Insert bobbin: Drop into case following directional arrows.

WARNING! Ensure machine is off during threading.

Maintenance & Cleaning

Unplug before maintenance. Regular cleaning ensures optimal performance.

1. Remove lint: Use brush to clean bobbin area and feed dogs.
2. Oil machine: Use sewing machine oil as directed in manual.
3. Check needle: Replace bent or dull needles immediately.
4. Clean exterior: Use soft, dry cloth only.

CAUTION! Do not use compressed air; it can force lint deeper.

Accessories

Standard accessories included with machine.

Accessory	Use
Zigzag Foot	General sewing
Zipper Foot	Installing zippers
Buttonhole Foot	Making buttonholes
Bobbin (class 15)	Lower thread supply
Needles	Spare HAx1 needles
Brush	Cleaning lint
Seam Ripper	Removing stitches

Safety Information

Important safety precautions for machine operation.

• Always unplug machine when not in use or during maintenance
• Keep fingers away from moving needle
• Do not pull fabric while sewing
• Use proper needle for fabric type
• Keep work area well-lit and organized
• Store machine in dry, dust-free area

WARNING! Never operate with damaged power cord.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Needle breaks	Wrong needle/bent needle	Replace with correct needle; ensure straight insertion.
Thread bunching	Improper threading/tension	Re-thread completely; check upper and lower threading.
Machine won't start	Power connection/foot controller	Check power cord; ensure foot controller is plugged in.
Uneven stitches	Tension issues/needle problems	Adjust tension dial; replace needle; check thread quality.
Fabric not feeding	Feed dogs lowered/thread jam	Raise feed dogs; clear any thread jams in bobbin area.

Service: Contact authorized Janome service center for repairs.

Support: Visit www.janome.com or contact customer service.